update software documentation

_nav.qd

@@ -9,6 +9,8 @@
 
 - [Firmware Updates](hardware/001-firmware-updates.qd)
 - [Thunderbolt](hardware/002-thunderbolt.qd)
+- [Power Profiles](hardware/003-power-profiles.qd)
+- [Keychron Keyboard](hardware/004-keychron.qd)
 
 ###! Software Configuration
 
@@ -18,3 +20,5 @@
 - [Signal](software/004-signal.qd)
 - [Telegram](software/005-telegram.qd)
 - [GnuPG](software/006-opengpg.qd)
+- [GnuPG](software/007-kdeconnect.qd)
+- [GnuPG](software/008-docker.qd)

hardware/004-keychron.qd

@@ -0,0 +1,23 @@
+.docname {Keychron Keyboard}
+.include {docs}
+
+# Keychron Keyboard
+
+To enable access to the keyboard for the QMK launcher (or similar programs), set the following udev rule in
+`/etc/udev/rules.d/99-keychron.conf`
+
+```
+# The Keyboard Itself
+KERNEL=="hidraw*", SUBSYSTEM=="hidraw", ATTRS{idVendor}=="3434", ATTRS{idProduct}=="0aa1", MODE="0666", TAG+="uaccess", TAG+="udev-acl"
+# The 2.4 Ghz Wireless Dongle
+KERNEL=="hidraw*", SUBSYSTEM=="hidraw", ATTRS{idVendor}=="3434", ATTRS{idProduct}=="d030", MODE="0666", TAG+="uaccess", TAG+="udev-acl"
+```
+
+Values for `idVendor` and `idProduct` can be found with `lsusb | grep -i Keychron`.
+
+Reload the udev rules `udevadm control --reload-rules`
+
+## Firmware Updates
+
+To enable firmware updates, install `yay -S dfu-util` to provide the required toolbox.
+

hardware/005-xps13-9350.qd

@@ -0,0 +1,177 @@
+.docname {XPS 13 9350 (2024)}
+.include {docs}
+
+## Sound
+
+Install the firmware `sof-firmware`
+
+## Camera
+
+The camera, while available on free software and without drivers,
+produces a very bad, raw image with green tint.
+
+To have a higher quality, we need to install a custom intel
+driver.
+
+Install `linux-firmware-intel libcamera-tools dkms linux-headers intel-vision-drivers-dkms-git pipewire-libcamera`.
+
+Make sure that the `intel_cvs` kernel module (and dependency) is loaded:
+
+`/etc/modules-load.d/intel_cvs.conf`:
+```txt
+gpio_ljca
+usb_ljca
+intel_cvs
+```
+
+After rebooting `cam -l` should show `1: Internal front camera (\_SB_.LINK1)`
+after some warnings. `qcam` should start a raw camera stream.
+The raw camera stream will have a greenish tint.
+
+> Note: The Intel Vision Driver module must already be loaded when the ov02c10 sensor is probed.
+> If you cannot see your camera, run `rmmod ov02c10` && `modprobe ov02c10` as root and try again.
+
+For Firefox, open about:config (See Firefox#Configuration) and set media.webrtc.camera.allow-pipewire to "True".
+
+For Chromium, enable the flag enable-webrtc-pipewire-camera in chrome://flags/ or set it in your configuration file.
+
+### Proprietary Hardware Stack
+
+The proprietary hardware stack requires additional components to be installed and configured,
+but it provides substantially better video quality vs using only open source drivers and software.
+First ensure that the above steps are complete at least to the point where qcam shows a raw camera stream.
+
+Download `intel-ipu7-dkms-git` and modify the PKBUILD file.
+
+```sh
+mkdir ~/.camera_driver
+cd ~/.camera_driver
+git clone https://aur.archlinux.org/intel-ipu7-dkms-git.git
+cd intel-ipu7-dkms-git
+nvim PKGBUILD
+```
+
+- remove the dependency `intel-ivsc-firmware` from the `depends` section.
+- Change `source=("git+${url}")` to instead point to a specific commit and
+  add a patch file to it
+  `source=("git+https://github.com/intel/ipu7-drivers.git#commit=77e3a0065697314cc7437a6eefd7e0d36ab06a4b" "https://patch-diff.githubusercontent.com/raw/intel/ipu7-drivers/pull/67.patch")`
+- Add another `'SKIP'` to `sha256sums`
+- In the `prepare()` section, apply the patch: `patch -Np1 -i ../67.patch`
+
+Here is the pkgfile
+
+```sh
+# Maintainer: Yamada Hayao <shun819.mail@gmail.com,>
+# Contributer: Karim Vergnes <me@thesola.io>
+
+pkgname=intel-ipu7-dkms-git
+_pkgname=ipu7-drivers
+pkgver=r77.77e3a00
+pkgrel=1
+pkgdesc="Intel IPU7 camera drivers (DKMS)"
+arch=('any')
+url="https://github.com/intel/${_pkgname}"
+license=('unknown')
+depends=('dkms')
+provides=('intel-ivsc-driver-dkms-git' 'intel-ipu7-dkms')
+conflicts=('intel-ivsc-driver-dkms-git')
+makedepends=('git')
+source=("git+https://github.com/intel/ipu7-drivers.git#commit=77e3a0065697314cc7437a6eefd7e0d36ab06a4b" "https://patch-diff.githubusercontent.com/raw/intel/ipu7-drivers/pull/67.patch")
+sha256sums=('SKIP' 'SKIP')
+
+pkgver() {
+    cd $_pkgname
+    printf "r%s.%s" "$(git rev-list --count HEAD)" "$(git rev-parse --short HEAD)"
+}
+
+prepare() {
+    cd "$srcdir/$_pkgname"
+	patch -Np1 -i ../67.patch
+    sed -i "s/^PACKAGE_VERSION=\".*\"$/PACKAGE_VERSION=\"$pkgver\"/g" ./dkms.conf
+}
+
+package() {
+    cd "$srcdir"
+    install -dm755 "$pkgdir/usr/src"
+    cp -rT "$_pkgname" "$pkgdir/usr/src/$_pkgname-$pkgver"
+}
+```
+
+Run the package build and install
+
+- `makepkg --syncdeps`
+- `makepkg --install`
+
+Install `intel-ipu7-camera-hal-git`
+
+Download `icamerasrc-git` and modify the PKBUILD file.
+
+```sh
+cd ~/.camera_driver
+git clone https://aur.archlinux.org/icamerasrc-git.git
+cd icamerasrc-git
+nvim PKGBUILD
+```
+
+- replace dpendency `ipu6-camera-hal` with `ipu7-camera-hal`
+
+Run the package build and install
+
+- `makepkg --syncdeps`
+- `makepkg --install`
+
+### Config Files
+
+Make sure that the kernel modules load in the correct order
+Remove the file `/etc/modules-load.d/intel_cvs.conf`.
+
+Create the file `/etc/modprobe.d/90-ipu7-usbio-order.conf` with
+
+```txt
+softdep intel_ipu7 pre: usbio gpio_usbio i2c_usbio intel_cvs intel_skl_int3472_discrete
+```
+
+Create the file `/usr/lib/udev/rules.d/90-ipu7-psys.rules`
+
+```txt
+KERNEL=="ipu7-psys0", MODE="0666", SYMLINK+="ipu-psys0"
+```
+
+Reboot the system.
+
+Check that the camera is now working with
+
+```sh
+gst-launch-1.0 -v icamerasrc ! video/x-raw,format=NV12,width=1920,height=1080,framerate=30/1 ! videoconvert ! videoflip method=rotate-180 ! waylandsink
+```
+
+### V4L2 Relay
+
+Now, we can create a V4L2 loopback device that presents the gstreamer/icamerasrc stream when activated.
+
+Install `v4l2-relayd`.
+
+Create the following file to instantiate the virtual v4l2loopback device on boot:
+
+`/etc/modprobe.d/v4l2loopback.conf`:
+
+```txt
+options v4l2loopback card_label="Intel IPU7 Virtual Camera"
+```
+
+Create the systemd service file for the relay.
+
+`/etc/v4l2-relayd.d/intel-ipu.conf`
+
+```ini
+VIDEOSRC="icamerasrc device-name=ov02c10-uf ! video/x-raw,format=NV12,width=1920,height=1080,framerate=30/1 ! videoconvert ! videoflip method=rotate-180"
+FORMAT=NV12
+WIDTH=1920
+HEIGHT=1080
+FRAMERATE=30/1
+CARD_LABEL="Intel IPU7 Virtual Camera"
+```
+
+Next, enable the `v4l2-relayd@intel-ipu.service`.
+
+After restarting your machine, any supported applications should see your camera as a standard V4L2 device with wide support.

main.qd

@@ -41,6 +41,9 @@ A system deployed with fz-stack **will not**:
 
 ## Todos
 
+- node version in starship anzeigen
+- node / nvm / npm version inspect
+
 [arch-linux]: https://archlinux.org
 [arch-linux-wiki]: https://wiki.archlinux.org/title/Main_page
 [hyprland]: https://hypr.land

software/001-librewolf.qd

@@ -87,3 +87,6 @@ Download and Install the following extensions
    Check <https://github.com/catppuccin/userstyles/tree/main>.
    Usage guide: <https://userstyles.catppuccin.com/getting-started/usage/>
 
+## Enable PWAs
+
+Enable PWAs by setting `browser.taskbarTabs.enabled` to `true` in `about:config`

software/007-kdeconnect.md

@@ -0,0 +1,5 @@
+.docname {KDE Connect}
+.include {docs}
+
+KDE connect provides features to connect to Android.
+Install `kdeconnect`

software/008-docker.md

@@ -0,0 +1,7 @@
+.docname {Docker}
+.include {docs}
+
+Install the package `docker`. Make sure that the user is in the group `docker`:
+`sudo usermod -aG docker $USER`.
+
+If the group does not yet exist, it can be created with `groupadd -r docker`.