From 2ba218cd77b40a142c09e085f0740d45917f537a Mon Sep 17 00:00:00 2001 From: Frank Zechert Date: Sat, 16 Aug 2025 15:20:58 +0200 Subject: [PATCH] Update of configuration before update --- .../01-configuration/KlipperScreen.conf | 0 02-klipper/01-configuration/adxl345_pico.cfg | 0 02-klipper/01-configuration/crowsnest.conf | 0 02-klipper/01-configuration/macros.cfg | 0 02-klipper/01-configuration/moonraker.conf | 0 02-klipper/01-configuration/printer.cfg | 154 ++++++++++++++++-- 02-klipper/01-configuration/timelapse.cfg | 0 02-klipper/01-configuration/variables.cfg | 1 + 8 files changed, 140 insertions(+), 15 deletions(-) mode change 100755 => 100644 02-klipper/01-configuration/KlipperScreen.conf mode change 100755 => 100644 02-klipper/01-configuration/adxl345_pico.cfg mode change 100755 => 100644 02-klipper/01-configuration/crowsnest.conf mode change 100755 => 100644 02-klipper/01-configuration/macros.cfg mode change 100755 => 100644 02-klipper/01-configuration/moonraker.conf mode change 100755 => 100644 02-klipper/01-configuration/printer.cfg mode change 100755 => 100644 02-klipper/01-configuration/timelapse.cfg mode change 100755 => 100644 02-klipper/01-configuration/variables.cfg diff --git a/02-klipper/01-configuration/KlipperScreen.conf b/02-klipper/01-configuration/KlipperScreen.conf old mode 100755 new mode 100644 diff --git a/02-klipper/01-configuration/adxl345_pico.cfg b/02-klipper/01-configuration/adxl345_pico.cfg old mode 100755 new mode 100644 diff --git a/02-klipper/01-configuration/crowsnest.conf b/02-klipper/01-configuration/crowsnest.conf old mode 100755 new mode 100644 diff --git a/02-klipper/01-configuration/macros.cfg b/02-klipper/01-configuration/macros.cfg old mode 100755 new mode 100644 diff --git a/02-klipper/01-configuration/moonraker.conf b/02-klipper/01-configuration/moonraker.conf old mode 100755 new mode 100644 diff --git a/02-klipper/01-configuration/printer.cfg b/02-klipper/01-configuration/printer.cfg old mode 100755 new mode 100644 index 4822e92..febda9e --- a/02-klipper/01-configuration/printer.cfg +++ b/02-klipper/01-configuration/printer.cfg @@ -84,7 +84,7 @@ max_z_velocity: 100 max_z_accel: 1500 minimum_z_position: -25 print_radius: 152 -delta_radius: 152 +#delta_radius: 152 ######################################## @@ -101,9 +101,9 @@ endstop_pin: ^PA15 homing_speed: 50 homing_retract_dist: 5.0 homing_retract_speed: 10 -angle: 210 -position_endstop: 415.0 -arm_length = 345.0 +#angle: 210 +#position_endstop: 415.0 +#arm_length = 345.0 [tmc2209 stepper_a] uart_pin: PD5 @@ -127,7 +127,7 @@ enable_pin: !PE1 microsteps: 64 # If you encounter an error while measuring the resonances. Replace the microsteps to 16 just for the duration of the test. rotation_distance: 40 endstop_pin: ^PA12 -angle: 330 +#angle: 330 [tmc2209 stepper_b] uart_pin: PD7 @@ -151,7 +151,7 @@ enable_pin: !PB8 microsteps: 64 # If you encounter an error while measuring the resonances. Replace the microsteps to 16 just for the duration of the test. rotation_distance: 40 endstop_pin: ^PC4 -angle: 90 +#angle: 90 [tmc2209 stepper_c] uart_pin: PD4 @@ -185,10 +185,10 @@ max_extrude_cross_section: 50 max_extrude_only_distance: 800 #pressure_advance: 0.04 #pressure_advance_smooth_time: 0.040 -control = pid -pid_kp = 17.501 -pid_ki = 0.711 -pid_kd = 107.630 +#control = pid +#pid_kp = 17.501 +#pid_ki = 0.711 +#pid_kd = 107.630 [tmc2209 extruder] uart_pin: PD9 @@ -211,10 +211,10 @@ sensor_pin: PC0 sensor_type: EPCOS 100K B57560G104F min_temp: -5 max_temp: 120 -control = pid -pid_kp = 64.044 -pid_ki = 3.812 -pid_kd = 268.984 +#control = pid +#pid_kp = 64.044 +#pid_ki = 3.812 +#pid_kd = 268.984 ######################################## @@ -247,7 +247,7 @@ heater_temp: 50.0 pin: !PA11 x_offset: 0 y_offset: 0 -z_offset: 0 +#z_offset: 0 speed: 10 lift_speed: 50 samples: 8 @@ -390,3 +390,127 @@ value: 1 #initial_RED: 1.0 #initial_GREEN: 1.0 #initial_BLUE: 1.0 + +#*# <---------------------- SAVE_CONFIG ----------------------> +#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated. +#*# +#*# [probe] +#*# z_offset = 18.200 +#*# +#*# [endstop_phase stepper_a] +#*# trigger_phase = 79/256 +#*# +#*# [endstop_phase stepper_b] +#*# trigger_phase = 254/256 +#*# +#*# [endstop_phase stepper_c] +#*# trigger_phase = 206/256 +#*# +#*# [printer] +#*# delta_radius = 162.829917 +#*# +#*# [stepper_a] +#*# angle = 209.300686 +#*# arm_length = 345.986970 +#*# position_endstop = 420.558738 +#*# +#*# [stepper_b] +#*# angle = 329.598688 +#*# arm_length = 348.438402 +#*# position_endstop = 420.515789 +#*# +#*# [stepper_c] +#*# angle = 90.000000 +#*# arm_length = 349.909343 +#*# position_endstop = 419.670651 +#*# +#*# [heater_bed] +#*# control = pid +#*# pid_kp = 71.526 +#*# pid_ki = 2.679 +#*# pid_kd = 477.439 +#*# +#*# [extruder] +#*# control = pid +#*# pid_kp = 20.379 +#*# pid_ki = 1.105 +#*# pid_kd = 93.998 +#*# +#*# [delta_calibrate] +#*# height0 = 18.2 +#*# height0_pos = 128643.125,128643.125,128643.125 +#*# height1 = 18.2 +#*# height1_pos = 151185.625,151185.625,116034.500 +#*# height2 = 18.2 +#*# height2_pos = 126066.750,163968.875,126066.750 +#*# height3 = 18.2 +#*# height3_pos = 116687.500,147509.000,147509.000 +#*# height4 = 18.2 +#*# height4_pos = 125447.875,125447.875,152735.000 +#*# height5 = 18.2 +#*# height5_pos = 144264.875,117511.375,144264.875 +#*# height6 = 18.2 +#*# height6_pos = 157982.000,125692.875,125692.875 +#*# distance0 = 65.22 +#*# distance0_pos1 = 133709.882,135048.967,134672.210 +#*# distance0_pos2 = 125585.537,143478.708,143124.587 +#*# distance1 = 66.614 +#*# distance1_pos1 = 134089.484,134283.784,135057.079 +#*# distance1_pos2 = 131134.771,131320.001,149879.921 +#*# distance2 = 64.81400000000001 +#*# distance2_pos1 = 134854.674,133904.832,134672.210 +#*# distance2_pos2 = 143294.832,125780.502,143124.587 +#*# distance3 = 65.24600000000001 +#*# distance3_pos1 = 135240.309,134286.604,133907.014 +#*# distance3_pos2 = 150063.143,131362.293,130962.953 +#*# distance4 = 66.542 +#*# distance4_pos1 = 134856.209,135051.810,133526.651 +#*# distance4_pos2 = 143320.798,143526.801,125402.299 +#*# distance5 = 64.902 +#*# distance5_pos1 = 134091.007,135435.256,133907.014 +#*# distance5_pos2 = 131157.605,150258.068,130962.953 +#*# distance6 = 64.86 +#*# distance6_pos1 = 126216.220,141729.000,142619.206 +#*# distance6_pos2 = 131727.833,130804.267,149244.077 +#*# distance7 = 64.97800000000001 +#*# distance7_pos1 = 131801.881,130878.122,147986.863 +#*# distance7_pos2 = 143547.785,125991.847,142119.881 +#*# distance8 = 64.95 +#*# distance8_pos1 = 142791.196,126413.194,141372.884 +#*# distance8_pos2 = 149428.202,131955.547,130445.748 +#*# distance9 = 64.958 +#*# distance9_pos1 = 148170.975,132027.495,130518.256 +#*# distance9_pos2 = 142315.947,143777.455,125612.344 +#*# distance10 = 64.86 +#*# distance10_pos1 = 141568.020,143018.187,126033.688 +#*# distance10_pos2 = 130639.607,149620.552,131556.083 +#*# distance11 = 65.418 +#*# distance11_pos1 = 130711.386,148363.366,131629.395 +#*# distance11_pos2 = 125794.880,142474.273,143376.735 +#*# +#*# [bed_mesh default] +#*# version = 1 +#*# points = +#*# 0.524343, 0.524343, 0.524343, 0.524343, 0.524343, 0.524343, 0.524343, 0.524343, 0.524343, 0.524343, 0.524343, 0.524343, 0.524343 +#*# 0.231169, 0.231169, 0.231169, 0.231169, 0.232428, 0.280081, 0.285922, 0.279157, 0.239096, 0.422663, 0.422663, 0.422663, 0.422663 +#*# -0.005174, -0.005174, -0.005174, 0.025327, 0.082217, 0.137324, 0.158020, 0.151443, 0.102332, 0.070268, -0.039889, -0.039889, -0.039889 +#*# -0.079447, -0.079447, -0.057088, -0.023754, 0.047550, 0.057709, 0.066657, 0.056336, 0.020827, -0.043294, -0.168739, -0.274343, -0.274343 +#*# -0.177325, -0.177325, -0.137760, -0.078935, -0.022789, 0.004518, 0.028573, 0.028511, -0.020562, -0.101591, -0.210414, -0.367500, -0.367500 +#*# -0.199219, -0.199219, -0.139245, -0.050099, -0.043992, 0.017620, 0.008821, 0.016731, -0.051243, -0.124389, -0.273944, -0.395915, -0.395915 +#*# -0.237914, -0.235596, -0.182026, -0.097795, -0.067260, -0.001307, 0.000000, 0.003958, -0.027834, -0.069716, -0.187086, -0.389913, -0.576114 +#*# -0.235295, -0.235295, -0.175098, -0.120312, -0.076814, 0.008930, 0.008336, 0.028647, -0.016478, -0.070346, -0.223752, -0.361365, -0.361365 +#*# -0.216282, -0.216282, -0.178705, -0.092129, 0.005655, 0.056249, 0.115697, 0.072443, 0.042605, -0.027682, -0.117692, -0.327184, -0.327184 +#*# -0.215117, -0.215117, -0.139050, -0.081913, -0.001323, 0.070507, 0.114049, 0.156553, 0.099954, 0.004564, -0.135462, -0.244350, -0.244350 +#*# -0.124974, -0.124974, -0.124974, -0.071656, 0.011119, 0.079444, 0.131822, 0.151263, 0.119350, 0.054511, -0.061693, -0.061693, -0.061693 +#*# -0.039318, -0.039318, -0.039318, -0.039318, 0.039569, 0.123939, 0.163471, 0.200670, 0.135058, 0.120987, 0.120987, 0.120987, 0.120987 +#*# 0.212010, 0.212010, 0.212010, 0.212010, 0.212010, 0.212010, 0.212010, 0.212010, 0.212010, 0.212010, 0.212010, 0.212010, 0.212010 +#*# x_count = 13 +#*# y_count = 13 +#*# mesh_x_pps = 2 +#*# mesh_y_pps = 2 +#*# algo = bicubic +#*# tension = 0.1 +#*# min_x = -147.0 +#*# max_x = 147.0 +#*# min_y = -147.0 +#*# max_y = 147.0 diff --git a/02-klipper/01-configuration/timelapse.cfg b/02-klipper/01-configuration/timelapse.cfg old mode 100755 new mode 100644 diff --git a/02-klipper/01-configuration/variables.cfg b/02-klipper/01-configuration/variables.cfg old mode 100755 new mode 100644 index 058e5a3..2f9a3a5 --- a/02-klipper/01-configuration/variables.cfg +++ b/02-klipper/01-configuration/variables.cfg @@ -1,2 +1,3 @@ [Variables] +zoffset = {'z': 0.11}