move configuration folder

03-cura/01-configuration/quality/PETG/0.4/flsun_v400_0.4_PETG_Draft_Print.inst.cfg

@@ -0,0 +1,54 @@
+[general]
+version = 4
+name = Draft
+definition = flsun_v400
+
+[metadata]
+setting_version = 23
+type = quality
+quality_type = draft
+weight = -2
+material = generic_petg
+variant = 0.4
+
+[values]
+# Quality
+
+
+# Walls
+
+
+# Top/Bottom
+
+
+# Infill
+
+
+# Material
+
+# Speed
+
+
+# Travel
+
+
+# Cooling
+
+# Support
+
+
+# Build Plate Adhesion
+
+
+# Mesh Fixes
+
+
+# Special Modes
+
+
+# Experimental
+
+
+# Klipper
+
+

03-cura/01-configuration/quality/PLA/0.4/flsun_v400_0.4_PLA_Draft_Print.inst.cfg

@@ -0,0 +1,54 @@
+[general]
+version = 4
+name = Draft
+definition = flsun_v400
+
+[metadata]
+setting_version = 23
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pla
+variant = 0.4
+
+[values]
+# Quality
+
+
+# Walls
+
+
+# Top/Bottom
+
+
+# Infill
+
+
+# Material
+
+# Speed
+
+
+# Travel
+
+
+# Cooling
+
+# Support
+
+
+# Build Plate Adhesion
+
+
+# Mesh Fixes
+
+
+# Special Modes
+
+
+# Experimental
+
+
+# Klipper
+
+

03-cura/01-configuration/quality/flsun_v400_global_Draft_Quality.inst.cfg

@@ -0,0 +1,69 @@
+
+[general]
+version = 4
+name = Fast (Draft Quality)
+definition = flsun_v400
+
+[metadata]
+setting_version = 23
+type = quality
+quality_type = draft
+weight = -2
+global_quality = True
+
+[values]
+
+# Quality
+layer_height = 0.2
+layer_height_0 = 0.2
+line_width = =machine_nozzle_size * 1.1
+
+# Walls
+wall_line_count = 2
+
+# Top/Bottom
+
+# Infill
+
+# Material
+
+# Speed
+
+# Travel
+
+# Cooling
+
+
+# Support
+
+
+# Build Plate Adhesion
+
+
+# Mesh Fixes
+
+
+# Special Modes
+
+
+# Experimental
+
+# Klipper
+# This printer is using Klipper Firmware Acceleration control, Jerk control, Retraction and Input Shaping is done by the
+# firmware and does not need to be done by Cura.
+# - enable hardware retraction with G10/G11
+machine_firmware_retract = True
+klipper_retract_length = =retraction_amount
+klipper_retract_prime_length = =retraction_extra_prime_amount
+klipper_retraction_speed = =retraction_speed
+klipper_retract_speed = =retraction_retract_speed
+klipper_retract_prime_speed = =retraction_prime_speed
+# - enable pressure advance
+klipper_pressure_advance_enable = True
+klipper_pressure_advance_factor = 0.04
+klipper_smooth_time_enable = True
+klipper_smooth_time_factor = 0.04
+
+# - disable cura acceleration and jerk control
+acceleration_enabled = False
+jerk_enabled = False