diff --git a/03-cura/01-configuration/quality/flsun_v400_global_Draft_Quality.inst.cfg b/03-cura/01-configuration/quality/flsun_v400_global_Draft_Quality.inst.cfg
index 5ab5b67..6b65f5f 100644
--- a/03-cura/01-configuration/quality/flsun_v400_global_Draft_Quality.inst.cfg
+++ b/03-cura/01-configuration/quality/flsun_v400_global_Draft_Quality.inst.cfg
@@ -26,6 +26,9 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
 infill_overlap = =20 if infill_sparse_density > 80 else 5
 infill_sparse_density = 20
 infill_wall_line_count = 1
+infill_enable_travel_optimization = True
+infill_wipe_dist = =line_width / 2
+wall_0_wipe_dist = =line_width
 zig_zaggify_infill = True
 
 bridge_settings_enabled = True
@@ -45,8 +48,9 @@ top_layers = 5
 bottom_layers = 4
 
 skin_monotonic = True
-skin_overlap = 15
+skin_overlap = 20
 skirt_gap = 10
+skin_edge_support_layers = 4
 
 bridge_skin_speed = 60
 bridge_wall_material_flow = 100
@@ -55,7 +59,7 @@ fill_outline_gaps = False
 
 optimize_wall_printing_order = True
 
-retraction_combing = off
+retraction_combing = noskin
 
 small_feature_speed_factor = 40
 small_hole_max_size = 9
@@ -71,6 +75,9 @@ speed_travel = =speed_print * 2
 speed_layer_0 = 30
 speed_print_layer_0 = =speed_layer_0
 speed_travel_layer_0 = =speed_print_layer_0 * 2
+speed_roofing = =speed_layer_0 * 2
+speed_wall_0_roofing = =speed_roofing
+speed_wall_x_roofing = =speed_roofing
 skirt_brim_speed = =speed_print_layer_0
 speed_slowdown_layers = 3
 
@@ -96,4 +103,6 @@ klipper_retract_speed = =retraction_speed
 klipper_retraction_speed = =retraction_speed
 klipper_pressure_advance_enable = True
 
-material_flow = 88
+material_flow = 94
+
+travel_avoid_supports = True
diff --git a/04-material/PLA/GEETECH/yellow.md b/04-material/PLA/GEETECH/yellow.md
index 2b052f9..17c9b68 100644
--- a/04-material/PLA/GEETECH/yellow.md
+++ b/04-material/PLA/GEETECH/yellow.md
@@ -5,11 +5,11 @@
 | :--------------------------------------------- | :------- |
 | Printing Temperature                           | 200°C    |
 | Build Plate Temperature                        | 60°C     |
-| Flow                                           | 88%      |
-| Retraction Distance                            | 0.85mm   |
-| Retraction Speed                               |          |
-| Retraction Extra Prime Amount                  |          |
-| Linear Advance                                 | 0.044    |
+| Flow                                           | 94%      |
+| Retraction Distance                            | 0.3mm    |
+| Retraction Speed                               | 50mm/s   |
+| Retraction Extra Prime Amount                  | 0.05mm   |
+| Linear Advance Factor                          | 0.020    |
 
 ## Prices