remove old configuration files

03-cura/01-configuration/quality/flsun_v400_global_Draft_Quality.inst.cfg

@@ -1,118 +0,0 @@
-[general]
-version = 4
-name = Fast (Draft Quality)
-definition = flsun_v400
-
-[metadata]
-setting_version = 23
-type = quality
-quality_type = draft
-weight = -2
-global_quality = True
-
-[values]
-layer_height = 0.2
-layer_height_0 = 0.2
-initial_layer_line_width_factor = 110
-adhesion_type = skirt
-
-acceleration_enabled = False
-acceleration_travel_enabled = False
-acceleration_Layer_0 = 5000
-acceleration_print = 8000
-acceleration_topbottom = 5000
-jerk_enabled = False
-
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
-infill_overlap = =20 if infill_sparse_density > 80 else 5
-infill_sparse_density = 10
-infill_wall_line_count = 1
-infill_enable_travel_optimization = True
-infill_wipe_dist = =line_width / 2
-infill_material_flow = =material_flow - 3
-wall_0_wipe_dist = =line_width
-zig_zaggify_infill = True
-
-bridge_settings_enabled = True
-
-support_enable = False
-support_structure = tree
-support_type = everywhere
-support_infill_rate = 10
-support_pattern = lines
-support_roof_enable = True
-support_roof_pattern = grid
-support_xy_distance = 0.16
-support_brim_line_count = 10
-support_material_flow = =material_flow - 4
-support_roof_density = 50
-support_roof_material_flow = =support_material_flow
-support_tree_bp_diameter = 10
-support_xy_distance_overhang = 0.3
-support_z_distance = 0.15
-zig_zaggify_support = True
-
-roofing_layer_count = 1
-top_bottom_thickness = 1
-top_layers = 5
-bottom_layers = 4
-
-skin_monotonic = True
-skin_overlap = 20
-skirt_gap = 10
-skin_edge_support_layers = 4
-
-bridge_skin_speed = 60
-bridge_wall_material_flow = 100
-
-fill_outline_gaps = False
-
-optimize_wall_printing_order = True
-
-retraction_combing = noskin
-
-small_feature_speed_factor = 40
-small_hole_max_size = 9
-
-speed_print = 120
-speed_infill = =speed_print * 1.0
-speed_support = =speed_print * 1.0
-speed_support_infill = =speed_print * 1.3
-speed_support_interface = =speed_print * 0.5
-support_interface_height = =layer_height * 2
-speed_support_roof = =speed_print * 0.5
-speed_support_bottom = =speed_print * 0.5
-support_interface_pattern = grid
-speed_travel = =speed_print * 2
-speed_layer_0 = 30
-speed_print_layer_0 = =speed_layer_0
-speed_travel_layer_0 = =speed_print_layer_0 * 2
-speed_roofing = =speed_layer_0 * 2
-speed_wall_0_roofing = =speed_roofing
-speed_wall_x_roofing = =speed_roofing
-skirt_brim_speed = =speed_print_layer_0
-speed_slowdown_layers = 3
-support_enable = False
-support_xy_distance = =line_width * 3
-support_z_distance = =layer_height * 1.5
-
-speed_z_hop = 30
-
-wall_line_count = 3
-wall_overhang_angle = 35
-wall_overhang_speed_factor = 30
-
-z_seam_type = sharpest_corner
-
-retraction_retract_speed = =retraction_speed
-retraction_prime_speed = =retraction_speed / 2
-
-machine_firmware_retract = True
-klipper_retract_length = =retraction_amount
-klipper_retract_prime_length = =retraction_extra_prime_amount
-klipper_retract_prime_speed = =retraction_prime_speed
-klipper_retract_speed = =retraction_speed
-klipper_retraction_speed = =retraction_speed
-klipper_pressure_advance_enable = True
-
-travel_avoid_supports = True