remove old configuration files
This commit is contained in:
@@ -1,64 +0,0 @@
|
|||||||
# Install Cura Plugins
|
|
||||||
|
|
||||||
- Settings Guide
|
|
||||||
- Sidebar GUI
|
|
||||||
- Moonraker Connection
|
|
||||||
- Material Settings
|
|
||||||
- Power Cost
|
|
||||||
- Klipper Settings
|
|
||||||
- AutoTowers Generator
|
|
||||||
- Auto-Orientation
|
|
||||||
- Automatic Slicing Toggle
|
|
||||||
- Material Cost Tools
|
|
||||||
- Calibration Shapes Reborn
|
|
||||||
|
|
||||||
# Disable Cura Plugins
|
|
||||||
|
|
||||||
- USB Printing
|
|
||||||
|
|
||||||
|
|
||||||
# Loading Cura Printer Profiles
|
|
||||||
|
|
||||||
Cura loads printer quality configuration files in a stack.
|
|
||||||
The following files must be present in order for Cura to load a profile.
|
|
||||||
|
|
||||||
## Quality File
|
|
||||||
|
|
||||||
The file `quality/flsun_v400_global_<quality>_Quality.inst.cfg` defines some global properties for all nozzle sizes and
|
|
||||||
all materials. Linking global qualities to layer heights is a valid example, but not a must. Cura's intentions seems to
|
|
||||||
be centred on print speed.
|
|
||||||
|
|
||||||
`<quality>` should be replaced with one of the values following values, at least one must be present.
|
|
||||||
|
|
||||||
- Superdraft (e.g. for layer height of `0.4mm`, or a speed of `600mm/s`)
|
|
||||||
- Verydraft (e.g. for a layer height of `0.3mm`, or a speed of `400mm/s`)
|
|
||||||
- Draft (e.g. for a layer height of `0.2mm`, or a speed of `300mm/s`)
|
|
||||||
- Fast (e.g. for a layer height of `0.15mm`, or a speed of `200mm/s`)
|
|
||||||
- Normal (e.g. for a layer height of `0.1mm`, or a speed of `150mm/s`)
|
|
||||||
- High (e.g. for a layer height of `0.06mm`, or a speed of `80mm/s`)
|
|
||||||
|
|
||||||
## Variant File
|
|
||||||
|
|
||||||
On top of the global quality file, there needs to be setting file for each variant:
|
|
||||||
`variants/flsun_v400_<variant>.inst.cfg`. The settings in these files are specific to the variant, but are independent
|
|
||||||
of all quality or material settings.
|
|
||||||
|
|
||||||
Variants can be whatever machine detail you want to choose. Commonly, this is the nozzle size.
|
|
||||||
|
|
||||||
## Specific Settings
|
|
||||||
|
|
||||||
The third layer of the stack is the quality, material, and variant specific settings in
|
|
||||||
`quality/<material>/<variant>/flsun_v400_<variant>_<material>_<quality>_Quality.inst.cfg`.
|
|
||||||
|
|
||||||
## Intentions
|
|
||||||
|
|
||||||
Optionally, there can be even more modifications of settings in intent files.
|
|
||||||
They are stored in the intents folder with the name intent
|
|
||||||
`<material>/flsun_v400_<variant>_<material>_<quality>_<intent>.inst.cfg`.
|
|
||||||
|
|
||||||
This file can modify settings that are only relevant for specific intents. Examples for intents are
|
|
||||||
|
|
||||||
- Dimensional accuracy
|
|
||||||
- Visual Quality
|
|
||||||
- Smooth Surface
|
|
||||||
- etc
|
|
||||||
@@ -1,74 +0,0 @@
|
|||||||
<html>
|
|
||||||
<head>
|
|
||||||
<meta charset="utf-8"/>
|
|
||||||
<title>Settings and replacement patterns</title>
|
|
||||||
<script type="text/javascript">
|
|
||||||
function showJSON(file) {
|
|
||||||
var xobj = new XMLHttpRequest();
|
|
||||||
xobj.overrideMimeType("application/json");
|
|
||||||
xobj.open('GET', file, false);
|
|
||||||
xobj.onreadystatechange = function () {
|
|
||||||
if (xobj.readyState == 4 && xobj.status == "200") {
|
|
||||||
var json = JSON.parse(xobj.responseText);
|
|
||||||
|
|
||||||
for(var category_id in json.settings) {
|
|
||||||
var category = json.settings[category_id];
|
|
||||||
document.write("<tr><th colspan=\"3\">" + category.label + "</th></tr>");
|
|
||||||
formatSettings(category.children);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
};
|
|
||||||
xobj.send(null);
|
|
||||||
}
|
|
||||||
|
|
||||||
function formatSettings(settings) {
|
|
||||||
for(var setting_id in settings) {
|
|
||||||
var setting = settings[setting_id];
|
|
||||||
document.write("<tr><td>{" + setting_id + "}</td><td>" + setting.label + "</td><td>" + setting.description + "</td></tr>");
|
|
||||||
if(setting.children) {
|
|
||||||
formatSettings(setting.children)
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
</script>
|
|
||||||
</head>
|
|
||||||
<body>
|
|
||||||
<h1>Settings and replacement patterns</h1>
|
|
||||||
<h2>Application-defined patterns</h2>
|
|
||||||
<table>
|
|
||||||
<script type="text/javascript">
|
|
||||||
formatSettings({
|
|
||||||
"time": {"label": "", "description": "Time when slicing started"},
|
|
||||||
"date": {"label": "", "description": "Date when slicing started"},
|
|
||||||
"day": {"label": "", "description": "Day when slicing started"},
|
|
||||||
"initial_extruder_nr": {"label": "", "description": "The first extruder train used for the print"},
|
|
||||||
"print_temperature": {"label": "", "description": "Alias for material_print_temperature (deprecated, do not use)"},
|
|
||||||
"print_bed_temperature": {"label": "", "description": "Alias for material_bed_temperature (deprecated, do not use)"},
|
|
||||||
"travel_speed": {"label": "", "description": "Alias for speed_travel (deprecated, do not use)"},
|
|
||||||
"material_id": {"label": "", "description": "The id of the material (eg 'ultimaker_pla_blue')"},
|
|
||||||
"material_type": {"label": "", "description": "The type of material (eg 'PLA')"},
|
|
||||||
"material_name": {"label": "", "description": "The display name of the material (eg 'Blue PLA'"},
|
|
||||||
"material_brand": {"label": "", "description": "The brand of the material (eg 'Ultimaker')"},
|
|
||||||
"print_time": {"label": "", "description": "The print duration in ISO8601 format"},
|
|
||||||
"filament_amount": {"label": "", "description": "List of the lengths of extruded filaments per extruder"},
|
|
||||||
"filament_weight": {"label": "", "description": "List of the weights of extruded filament per extruder, if material density is known"},
|
|
||||||
"filament_cost": {"label": "", "description": "List of the cost of the extruded filaments per extruder, if the price of the material is known"},
|
|
||||||
"jobname": {"label": "", "description": "Print job name"}
|
|
||||||
});
|
|
||||||
</script>
|
|
||||||
</table>
|
|
||||||
<h2>Settings</h2>
|
|
||||||
<p>The following settings are defined in <a href="https://github.com/Ultimaker/Cura/blob/master/resources/definitions/fdmprinter.def.json">fdmprinter.def.json</a>.</p>
|
|
||||||
<table>
|
|
||||||
<script type="text/javascript">
|
|
||||||
showJSON("https://raw.githubusercontent.com/Ultimaker/Cura/master/resources/definitions/fdmprinter.def.json");
|
|
||||||
</script>
|
|
||||||
</table>
|
|
||||||
<h2>Extruder settings</h2>
|
|
||||||
<p>The following settings are defined in <a href="https://github.com/Ultimaker/Cura/blob/master/resources/definitions/fdmextruder.def.json">fdmextruder.def.json</a>, and are only settable per extruder</p>
|
|
||||||
<table>
|
|
||||||
<script type="text/javascript">
|
|
||||||
showJSON("https://raw.githubusercontent.com/Ultimaker/Cura/master/resources/definitions/fdmextruder.def.json");
|
|
||||||
</script>
|
|
||||||
</table>
|
|
||||||
</body>
|
|
||||||
@@ -1,80 +0,0 @@
|
|||||||
{
|
|
||||||
"version": 2,
|
|
||||||
"name": "Flsun V400",
|
|
||||||
"inherits": "fdmprinter",
|
|
||||||
"metadata": {
|
|
||||||
"visible": true,
|
|
||||||
"author": "FLSUN, Guislain Cyril, Frank Zechert",
|
|
||||||
"manufacturer": "Flsun",
|
|
||||||
"file_formats": "text/x-gcode",
|
|
||||||
"platform": "flsun_v400.stl",
|
|
||||||
"has_machine_quality": true,
|
|
||||||
"has_materials": true,
|
|
||||||
"machine_extruder_trains": {
|
|
||||||
"0": "flsun_v400_extruder_0"
|
|
||||||
},
|
|
||||||
"platform_offset": [
|
|
||||||
0,
|
|
||||||
-40.6455,
|
|
||||||
-43.5
|
|
||||||
]
|
|
||||||
},
|
|
||||||
"overrides": {
|
|
||||||
"gantry_height": {
|
|
||||||
"value": "0"
|
|
||||||
},
|
|
||||||
"infill_sparse_density": {
|
|
||||||
"default_value": 15
|
|
||||||
},
|
|
||||||
"machine_center_is_zero": {
|
|
||||||
"default_value": true
|
|
||||||
},
|
|
||||||
"machine_depth": {
|
|
||||||
"default_value": 300
|
|
||||||
},
|
|
||||||
"machine_end_gcode": {
|
|
||||||
"default_value": "END_PRINT\n"
|
|
||||||
},
|
|
||||||
"machine_head_with_fans_polygon": {
|
|
||||||
"default_value": [
|
|
||||||
[
|
|
||||||
0,
|
|
||||||
0
|
|
||||||
],
|
|
||||||
[
|
|
||||||
0,
|
|
||||||
0
|
|
||||||
],
|
|
||||||
[
|
|
||||||
0,
|
|
||||||
0
|
|
||||||
],
|
|
||||||
[
|
|
||||||
0,
|
|
||||||
0
|
|
||||||
]
|
|
||||||
]
|
|
||||||
},
|
|
||||||
"machine_heated_bed": {
|
|
||||||
"default_value": true
|
|
||||||
},
|
|
||||||
"machine_height": {
|
|
||||||
"default_value": 410
|
|
||||||
},
|
|
||||||
"machine_shape": {
|
|
||||||
"default_value": "elliptic"
|
|
||||||
},
|
|
||||||
"machine_start_gcode": {
|
|
||||||
"default_value": ";Nozzle diameter = {machine_nozzle_size}\n;Filament type = {material_type}\n;Filament name = {material_brand} {material_name}\n;Filament weight = {filament_weight}\n;M109 S{material_print_temperature}\n;M190 S{material_bed_temperature}\n\nSTART_PRINT BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0}\n"
|
|
||||||
},
|
|
||||||
"machine_width": {
|
|
||||||
"default_value": 300
|
|
||||||
},
|
|
||||||
"material_diameter": {
|
|
||||||
"default_value": 1.75
|
|
||||||
},
|
|
||||||
"z_seam_type": {
|
|
||||||
"value": "'sharpest_corner'"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
@@ -1,56 +0,0 @@
|
|||||||
{
|
|
||||||
"version": 2,
|
|
||||||
"name": "Extruder 1",
|
|
||||||
"inherits": "fdmextruder",
|
|
||||||
"metadata": {
|
|
||||||
"machine": "flsun_v400",
|
|
||||||
"position": "0"
|
|
||||||
},
|
|
||||||
"overrides": {
|
|
||||||
"extruder_nr": {
|
|
||||||
"default_value": 0
|
|
||||||
},
|
|
||||||
"material_diameter": {
|
|
||||||
"default_value": 1.75
|
|
||||||
},
|
|
||||||
"machine_nozzle_size": {
|
|
||||||
"default_value": 0.4
|
|
||||||
},
|
|
||||||
"material_max_temperature": {
|
|
||||||
"default_value": 300
|
|
||||||
},
|
|
||||||
"material_min_temperature": {
|
|
||||||
"default_value": 180
|
|
||||||
},
|
|
||||||
"material_flow": {
|
|
||||||
"default_value": 100
|
|
||||||
},
|
|
||||||
"retraction_enable": {
|
|
||||||
"default_value": true
|
|
||||||
},
|
|
||||||
"retraction_amount": {
|
|
||||||
"default_value": 0.8
|
|
||||||
},
|
|
||||||
"retraction_speed": {
|
|
||||||
"default_value": 35.0
|
|
||||||
},
|
|
||||||
"retraction_min_travel": {
|
|
||||||
"default_value": 1.5
|
|
||||||
},
|
|
||||||
"cool_fan_enabled": {
|
|
||||||
"default_value": true
|
|
||||||
},
|
|
||||||
"cool_fan_speed": {
|
|
||||||
"default_value": 80
|
|
||||||
},
|
|
||||||
"cool_min_layer_time": {
|
|
||||||
"default_value": 5
|
|
||||||
},
|
|
||||||
"speed_print": {
|
|
||||||
"default_value": 150
|
|
||||||
},
|
|
||||||
"speed_travel": {
|
|
||||||
"default_value": 250
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
@@ -1,44 +0,0 @@
|
|||||||
#!/bin/bash
|
|
||||||
|
|
||||||
DIR="$(dirname "$(realpath "$0")")"
|
|
||||||
CURA_CONFIG_BASE="${HOME}/.config/cura"
|
|
||||||
CURA_FOLDER="/opt/ultimaker-cura"
|
|
||||||
|
|
||||||
function get_cura_directories() {
|
|
||||||
local VERSION
|
|
||||||
VERSION=$(find "${CURA_CONFIG_BASE}" -maxdepth 1 -mindepth 1 -type d -printf "%f\n" -prune | sort -Vr | head -n1)
|
|
||||||
CURA_CONFIG="${HOME}/.config/cura/${VERSION}"
|
|
||||||
CURA_SHARE="${HOME}/.local/share/cura/${VERSION}"
|
|
||||||
CURA_INTERNAL_SHARE="${CURA_FOLDER}/share/cura/resources"
|
|
||||||
}
|
|
||||||
|
|
||||||
get_cura_directories
|
|
||||||
|
|
||||||
echo "-------------------"
|
|
||||||
echo "Cura Configuration Folder: ${CURA_CONFIG}"
|
|
||||||
echo "Cura Share Folder: ${CURA_SHARE}"
|
|
||||||
echo "Cura Folder: ${CURA_FOLDER}"
|
|
||||||
echo "Own Folder: ${DIR}"
|
|
||||||
echo "-------------------"
|
|
||||||
echo "Deleting existing Cura resources for the printer FLSUN V400"
|
|
||||||
find "${CURA_INTERNAL_SHARE}" -type f -iname 'flsun_v400*' -exec sudo rm {} +
|
|
||||||
echo "-------------------"
|
|
||||||
echo "Installing new Cura resources for the printer FLSUN V400"
|
|
||||||
mkdir -p "${CURA_SHARE}/definitions" 2>/dev/null
|
|
||||||
mkdir -p "${CURA_SHARE}/extruders" 2>/dev/null
|
|
||||||
mkdir -p "${CURA_SHARE}/meshes" 2>/dev/null
|
|
||||||
ln -sf "${DIR}/definitions/flsun_v400.def.json" "${CURA_SHARE}/definitions/flsun_v400.def.json"
|
|
||||||
ln -sf "${DIR}/extruders/flsun_v400_extruder_0.def.json" "${CURA_SHARE}/extruders/flsun_v400_extruder_0.def.json"
|
|
||||||
ln -sf "${DIR}/meshes/flsun_v400.stl" "${CURA_SHARE}/meshes/flsun_v400.stl"
|
|
||||||
echo "-------------------"
|
|
||||||
echo "Installing Quality Profile"
|
|
||||||
mkdir -p "${CURA_SHARE}/quality"
|
|
||||||
mkdir -p "${CURA_SHARE}/quality/PLA/0.4"
|
|
||||||
mkdir -p "${CURA_SHARE}/quality/PETG/0.4"
|
|
||||||
mkdir -p "${CURA_SHARE}/variants"
|
|
||||||
ln -sf "${DIR}/quality/flsun_v400_global_Draft_Quality.inst.cfg" "${CURA_SHARE}/quality/flsun_v400_global_Draft_Quality.inst.cfg"
|
|
||||||
ln -sf "${DIR}/variants/flsun_v400_0.4.inst.cfg" "${CURA_SHARE}/variants/flsun_v400_0.4.inst.cfg"
|
|
||||||
ln -sf "${DIR}/quality/PLA/0.4/flsun_v400_0.4_PLA_Draft_Print.inst.cfg" "${CURA_SHARE}/quality/PLA/0.4/flsun_v400_0.4_PLA_Draft_Print.inst.cfg"
|
|
||||||
ln -sf "${DIR}/quality/PETG/0.4/flsun_v400_0.4_PETG_Draft_Print.inst.cfg" "${CURA_SHARE}/quality/PETG/0.4/flsun_v400_0.4_PETG_Draft_Print.inst.cfg"
|
|
||||||
echo "-------------------"
|
|
||||||
echo "Done"
|
|
||||||
Binary file not shown.
@@ -1,15 +0,0 @@
|
|||||||
[general]
|
|
||||||
version = 4
|
|
||||||
name = Draft
|
|
||||||
definition = flsun_v400
|
|
||||||
|
|
||||||
[metadata]
|
|
||||||
setting_version = 22
|
|
||||||
type = quality
|
|
||||||
quality_type = draft
|
|
||||||
weight = -2
|
|
||||||
material = generic_pla
|
|
||||||
variant = 0.4
|
|
||||||
|
|
||||||
[values]
|
|
||||||
line_width = 0.44
|
|
||||||
@@ -1,15 +0,0 @@
|
|||||||
[general]
|
|
||||||
version = 4
|
|
||||||
name = Draft
|
|
||||||
definition = flsun_v400
|
|
||||||
|
|
||||||
[metadata]
|
|
||||||
setting_version = 22
|
|
||||||
type = quality
|
|
||||||
quality_type = draft
|
|
||||||
weight = -2
|
|
||||||
material = generic_pla
|
|
||||||
variant = 0.4
|
|
||||||
|
|
||||||
[values]
|
|
||||||
line_width = 0.44
|
|
||||||
@@ -1,118 +0,0 @@
|
|||||||
[general]
|
|
||||||
version = 4
|
|
||||||
name = Fast (Draft Quality)
|
|
||||||
definition = flsun_v400
|
|
||||||
|
|
||||||
[metadata]
|
|
||||||
setting_version = 23
|
|
||||||
type = quality
|
|
||||||
quality_type = draft
|
|
||||||
weight = -2
|
|
||||||
global_quality = True
|
|
||||||
|
|
||||||
[values]
|
|
||||||
layer_height = 0.2
|
|
||||||
layer_height_0 = 0.2
|
|
||||||
initial_layer_line_width_factor = 110
|
|
||||||
adhesion_type = skirt
|
|
||||||
|
|
||||||
acceleration_enabled = False
|
|
||||||
acceleration_travel_enabled = False
|
|
||||||
acceleration_Layer_0 = 5000
|
|
||||||
acceleration_print = 8000
|
|
||||||
acceleration_topbottom = 5000
|
|
||||||
jerk_enabled = False
|
|
||||||
|
|
||||||
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
|
|
||||||
infill_overlap = =20 if infill_sparse_density > 80 else 5
|
|
||||||
infill_sparse_density = 10
|
|
||||||
infill_wall_line_count = 1
|
|
||||||
infill_enable_travel_optimization = True
|
|
||||||
infill_wipe_dist = =line_width / 2
|
|
||||||
infill_material_flow = =material_flow - 3
|
|
||||||
wall_0_wipe_dist = =line_width
|
|
||||||
zig_zaggify_infill = True
|
|
||||||
|
|
||||||
bridge_settings_enabled = True
|
|
||||||
|
|
||||||
support_enable = False
|
|
||||||
support_structure = tree
|
|
||||||
support_type = everywhere
|
|
||||||
support_infill_rate = 10
|
|
||||||
support_pattern = lines
|
|
||||||
support_roof_enable = True
|
|
||||||
support_roof_pattern = grid
|
|
||||||
support_xy_distance = 0.16
|
|
||||||
support_brim_line_count = 10
|
|
||||||
support_material_flow = =material_flow - 4
|
|
||||||
support_roof_density = 50
|
|
||||||
support_roof_material_flow = =support_material_flow
|
|
||||||
support_tree_bp_diameter = 10
|
|
||||||
support_xy_distance_overhang = 0.3
|
|
||||||
support_z_distance = 0.15
|
|
||||||
zig_zaggify_support = True
|
|
||||||
|
|
||||||
roofing_layer_count = 1
|
|
||||||
top_bottom_thickness = 1
|
|
||||||
top_layers = 5
|
|
||||||
bottom_layers = 4
|
|
||||||
|
|
||||||
skin_monotonic = True
|
|
||||||
skin_overlap = 20
|
|
||||||
skirt_gap = 10
|
|
||||||
skin_edge_support_layers = 4
|
|
||||||
|
|
||||||
bridge_skin_speed = 60
|
|
||||||
bridge_wall_material_flow = 100
|
|
||||||
|
|
||||||
fill_outline_gaps = False
|
|
||||||
|
|
||||||
optimize_wall_printing_order = True
|
|
||||||
|
|
||||||
retraction_combing = noskin
|
|
||||||
|
|
||||||
small_feature_speed_factor = 40
|
|
||||||
small_hole_max_size = 9
|
|
||||||
|
|
||||||
speed_print = 120
|
|
||||||
speed_infill = =speed_print * 1.0
|
|
||||||
speed_support = =speed_print * 1.0
|
|
||||||
speed_support_infill = =speed_print * 1.3
|
|
||||||
speed_support_interface = =speed_print * 0.5
|
|
||||||
support_interface_height = =layer_height * 2
|
|
||||||
speed_support_roof = =speed_print * 0.5
|
|
||||||
speed_support_bottom = =speed_print * 0.5
|
|
||||||
support_interface_pattern = grid
|
|
||||||
speed_travel = =speed_print * 2
|
|
||||||
speed_layer_0 = 30
|
|
||||||
speed_print_layer_0 = =speed_layer_0
|
|
||||||
speed_travel_layer_0 = =speed_print_layer_0 * 2
|
|
||||||
speed_roofing = =speed_layer_0 * 2
|
|
||||||
speed_wall_0_roofing = =speed_roofing
|
|
||||||
speed_wall_x_roofing = =speed_roofing
|
|
||||||
skirt_brim_speed = =speed_print_layer_0
|
|
||||||
speed_slowdown_layers = 3
|
|
||||||
support_enable = False
|
|
||||||
support_xy_distance = =line_width * 3
|
|
||||||
support_z_distance = =layer_height * 1.5
|
|
||||||
|
|
||||||
speed_z_hop = 30
|
|
||||||
|
|
||||||
wall_line_count = 3
|
|
||||||
wall_overhang_angle = 35
|
|
||||||
wall_overhang_speed_factor = 30
|
|
||||||
|
|
||||||
z_seam_type = sharpest_corner
|
|
||||||
|
|
||||||
retraction_retract_speed = =retraction_speed
|
|
||||||
retraction_prime_speed = =retraction_speed / 2
|
|
||||||
|
|
||||||
machine_firmware_retract = True
|
|
||||||
klipper_retract_length = =retraction_amount
|
|
||||||
klipper_retract_prime_length = =retraction_extra_prime_amount
|
|
||||||
klipper_retract_prime_speed = =retraction_prime_speed
|
|
||||||
klipper_retract_speed = =retraction_speed
|
|
||||||
klipper_retraction_speed = =retraction_speed
|
|
||||||
klipper_pressure_advance_enable = True
|
|
||||||
|
|
||||||
travel_avoid_supports = True
|
|
||||||
@@ -1,12 +0,0 @@
|
|||||||
[general]
|
|
||||||
name = 0.4
|
|
||||||
version = 4
|
|
||||||
definition = flsun_v400
|
|
||||||
|
|
||||||
[metadata]
|
|
||||||
setting_version = 20
|
|
||||||
type = variant
|
|
||||||
hardware_type = nozzle
|
|
||||||
|
|
||||||
[values]
|
|
||||||
line_width = 0.44
|
|
||||||
Reference in New Issue
Block a user