move configuration folder

03-cura/01-configuration/.cspell.json

@@ -0,0 +1,9 @@
+{
+  "words": [
+    "Zechert",
+    "Cura",
+    "FLSUN",
+    "Superdraft",
+    "Verydraft"
+  ]
+}

03-cura/01-configuration/.editorconfig

@@ -0,0 +1,9 @@
+root = true
+
+[*]
+end_of_line = lf
+insert_final_newline = true
+charset = utf-8
+
+[*.md]
+indent_style = tab

03-cura/01-configuration/.gitignore

@@ -0,0 +1,2 @@
+.vale/styles/*
+!.vale/styles/Vocabulary

03-cura/01-configuration/.markdownlint.json

@@ -0,0 +1,5 @@
+{
+	"MD013": {
+		"line_length": 120
+	}
+}

03-cura/01-configuration/README.md

@@ -1,4 +1,149 @@
-# Install Cura Plugins
+# Cura printer profiles for Flsun V400 <!-- vale Microsoft.Headings = NO -->
+
+by Frank Zechert, 2025
+
+## About
+
+This directory contains cura printer definition and printing profiles for the 3d printer Flsun V400.
+
+## Install
+
+On a linux based system, run `install.sh` to install the configuration files into the cura directory.
+This will delete any other files that might be present for a flsun v400 printer.
+
+## Directory structure and configuration stack
+
+Cura stores printers and profiles across different directories that define different parts of the machine or the
+printing profile, and / or overwrite parts of it depending on presets. Cura loads them in a stack to get the current
+value of a configuration parameter that should apply to the print.
+
+### Directory structure
+
+<!-- markdownlint-disable MD013 -->
+
+| Folder        | Purpose                                                        | Typical Structure                                   | File Suffix                  |
+| :------------ | :------------------------------------------------------------- | :-------------------------------------------------- | :--------------------------- |
+| `definitions` | Defines the printer's core attributes                          | each printer has one file here                      | `printer_name.inst.cfg`      |
+| `extruders`   | Describes extruder-specific settings                           | can have multiple extruder configs per printer      | `extruder_name.inst.cfg`     |
+| `meshes`      | Contains files for visual representation of the printer.       | usually one per printer, optional                   | `printer_name.stl` or `.3mf` |
+| `intents`     | Print result intentions.                                       | one file per intent                                 | `intent.inst.cfg`            |
+| `quality`     | Stores print quality presets                                   | `printer_name` -> `material_name` -> `quality_type` | `quality_type.inst.cfg`      |
+| `variants`    | Defines nozzle diameter variants and links to quality profiles | `printer_name` -> `nozzle_size`                     | `variant.inst.cfg`           |
+
+<!-- markdownlint-enable MD013 -->
+
+### A note on intents and qualities
+
+An intent profile defines the intention for a print, such as precision, strength, visual quality, flexibility, etc.
+It might be empty, in which case it's displayed as the `default` intent.
+
+A quality profile defines different levels of quality, possibly within an intent if it exist. Different settings can
+influence the level of quality. For example, by changing the print speed or the layer height. They're in itself
+independent of the intent of the print.
+
+The print settings are a combination of intent settings (if an intent exists) and the quality level.
+
+### Configuration stack
+
+Cura stores configuration profiles in a stack. At the bottom of the stack is a definition container that defines
+all possible settings and properties a printer might have. On top of this definition container, a number of profile
+customizations and changes by the user take precedence over other quality profile definitions.
+
+When cura determines the value of a setting, it will look at the top most element in the stack that defines the
+setting's value.
+
+A printer has at least two stacks. A global stack that defines settings for the printer as a whole, and a stack for each
+extruder (at least one). The extruder-specific stack is always a higher priority than the global stack.
+
+```text
++--------------------------------------+
+| Extruder n Configuration Stack       |
++--------------------------------------+
+| 1. User settings made in the UI      |
+| 2. Custom settings saved by the user |
+| 3. Profile intent file (optional)    |
+| 4. Profile quality                   |
+| 5. Material settings                 |
+| 6. Nozzle settings                   |
+| 7. Definition changes                |
+| 8. Extruder Definition               |
++--------------------------------------+
+
+                  |
+                  v
+
++--------------------------------------+
+| Global Configuration Stack           |
++--------------------------------------+
+| 1. User settings made in the UI      |
+| 2. Custom settings saved by the user |
+| 3. Profile intent file (optional)    |
+| 4. Profile quality                   |
+| 5. Material settings                 |
+| 6. Variant settings                  |
+| 7. Definition changes                |
+| 8. Extruder Definition               |
++--------------------------------------+
+```
+
+For more details, see <https://github.com/Ultimaker/Cura/wiki/Container-Stacks>.
+
+### Printer definition
+
+This defines the basic printer and extruder capabilities. This is level `8` and `7` in the global and extruder
+configuration stacks.
+
+- The printer definition is in `definitions/flsun_v400.def.json`.
+- It has one extruder defined in `extruders/flsun_v400_extruder_0.def.json`.
+- The physical appearance of the printer is in `meshes/flsun_v400.stl`.
+
+### Intent files
+
+For now, this profile doesn't use intent files.
+
+### Quality files
+
+The quality files contain settings specifically relating to the quality of the print. They're defined in the file
+`quality/flsun_v400_global_<quality preset>_Quality.inst.cfg`. This file defines some global properties for all nozzle
+sizes and all materials. Linking global qualities to layer heights is a valid example, but not a must. Cura's intention
+seems to be a focus on print speed.
+
+In the configuration stacks, this relates to point `4`.
+
+You can choose the word that replaces `<quality preset>` in the file name. But the Cura UI will only integrate the
+quality profile if the quality preset placeholder contains known values:
+
+- Superdraft (for example for a layer height of `0.4mm` or a speed of `400mm/s`)
+- Verydraft (for example for a layer height of `0.3mm` or a speed of `320mm/s`)
+- Draft (for example for a layer height of `0.2mm` or a speed of `260mm/s`)
+- Fast (for example for a layer height of `0.15mm` or a speed of `180mm/s`)
+- Normal (for example for a layer height of `0.1mm` or a speed of `120mm/s`)
+- High (for example for a layer height of `0.06mm` or a speed of `80mm/s`)
+
+Not all files must exist, but at least one file needs to exist to compose a valid printing profile.
+
+This profile currently contains one quality file `quality/flsun_v400_global_Draft_Quality.inst.cfg`.
+
+### Material files
+
+Material files have the name `quality/<material name>/<nozzle size>/flsun_v400_<nozzle size>_<quality
+preset>_Print.inst.cfg`. They relate to step `5` in the configuration stacks.
+
+For now this profile contains the following files:
+
+- PLA or PLA+ with 0.4mm nozzle:
+  - Draft quality: `quality/PLA/0.4/flsun_v400_0.4_Draft_Print.inst.cfg`.
+
+### Variants file
+
+Currently this profile defines only one variant, a `0.4mm` nozzle size. This relates to step `6` in the configuration
+stack.
+
+- `variants/flsun_v400_0.4.inst.cfg`
+
+## Recommended Plugins
+
+Recommended plugins for the Cura Slicer:
 
 - Settings Guide
 - Sidebar GUI
@@ -6,59 +151,13 @@
 - Material Settings
 - Power Cost
 - Klipper Settings
-- AutoTowers Generator
+- AutoTower Generator
 - Auto-Orientation
 - Automatic Slicing Toggle
 - Material Cost Tools
 - Calibration Shapes Reborn
+- Direct Support Blockers Reborn
 
-# Disable Cura Plugins
+Also disable the following plugin to reduce loading speeds on linux:
 
 - USB Printing
-
-
-# Loading Cura Printer Profiles
-
-Cura loads printer quality configuration files in a stack.
-The following files must be present in order for Cura to load a profile.
-
-## Quality File
-
-The file `quality/flsun_v400_global_<quality>_Quality.inst.cfg` defines some global properties for all nozzle sizes and
-all materials. Linking global qualities to layer heights is a valid example, but not a must. Cura's intentions seems to
-be centred on print speed.
-
-`<quality>`  should be replaced with one of the values following values, at least one must be present.
-
-- Superdraft (e.g. for layer height of `0.4mm`, or a speed of `600mm/s`)
-- Verydraft (e.g. for a layer height of `0.3mm`, or a speed of `400mm/s`)
-- Draft (e.g. for a layer height of `0.2mm`, or a speed of `300mm/s`)
-- Fast (e.g. for a layer height of `0.15mm`, or a speed of `200mm/s`)
-- Normal (e.g. for a layer height of `0.1mm`, or a speed of `150mm/s`)
-- High (e.g. for a layer height of `0.06mm`, or a speed of `80mm/s`)
-
-## Variant File
-
-On top of the global quality file, there needs to be setting file for each variant:
-`variants/flsun_v400_<variant>.inst.cfg`. The settings in these files are specific to the variant, but are independent
-of all quality or material settings.
-
-Variants can be whatever machine detail you want to choose. Commonly, this is the nozzle size.
-
-## Specific Settings
-
-The third layer of the stack is the quality, material, and variant specific settings in 
-`quality/<material>/<variant>/flsun_v400_<variant>_<material>_<quality>_Quality.inst.cfg`.
-
-## Intentions
-
-Optionally, there can be even more modifications of settings in intent files. 
-They are stored in the intents folder with the name intent
-`<material>/flsun_v400_<variant>_<material>_<quality>_<intent>.inst.cfg`.
-
-This file can modify settings that are only relevant for specific intents. Examples for intents are
-
-- Dimensional accuracy
-- Visual Quality
-- Smooth Surface
-- etc

03-cura/01-configuration/extruders/flsun_v400_extruder_0.def.json

@@ -44,13 +44,16 @@
 			"default_value": 80
 		},
 		"cool_min_layer_time": {
-			"default_value": 5
+			"default_value": 10
 		},
 		"speed_print": {
-			"default_value": 150
+			"default_value": 250
 		},
 		"speed_travel": {
-			"default_value": 250
+			"default_value": 350
+		},
+		"klipper_pressure_advance_enable": {
+			"default_value": true
 		}
 	}
 }

03-cura/01-configuration/install.sh

@@ -12,6 +12,16 @@ function get_cura_directories() {
 	CURA_INTERNAL_SHARE="${CURA_FOLDER}/share/cura/resources"
 }
 
+function check_continue() {
+	while true; do
+		read -rp "Continue? [y/n]: " yn
+		case $yn in
+			[Yy]*) return 0 ;;
+			[Nn]*) echo "Aborted"; return 1 ;;
+		esac
+	done
+}
+
 get_cura_directories
 
 echo "-------------------"
@@ -20,6 +30,8 @@ echo "Cura Share Folder: ${CURA_SHARE}"
 echo "Cura Folder: ${CURA_FOLDER}"
 echo "Own Folder: ${DIR}"
 echo "-------------------"
+check_continue
+echo "-------------------"
 echo "Deleting existing Cura resources for the printer FLSUN V400"
 find "${CURA_INTERNAL_SHARE}" -type f -iname 'flsun_v400*' -exec sudo rm {} +
 echo "-------------------"

03-cura/01-configuration/quality/PETG/0.4/flsun_v400_0.4_PETG_Draft_Print.inst.cfg

@@ -4,12 +4,51 @@ name = Draft
 definition = flsun_v400
 
 [metadata]
-setting_version = 22
+setting_version = 23
 type = quality
 quality_type = draft
 weight = -2
-material = generic_pla
+material = generic_petg
 variant = 0.4
 
 [values]
-line_width = 0.44
+# Quality
+
+
+# Walls
+
+
+# Top/Bottom
+
+
+# Infill
+
+
+# Material
+
+# Speed
+
+
+# Travel
+
+
+# Cooling
+
+# Support
+
+
+# Build Plate Adhesion
+
+
+# Mesh Fixes
+
+
+# Special Modes
+
+
+# Experimental
+
+
+# Klipper
+
+

03-cura/01-configuration/quality/PLA/0.4/flsun_v400_0.4_PLA_Draft_Print.inst.cfg

@@ -4,7 +4,7 @@ name = Draft
 definition = flsun_v400
 
 [metadata]
-setting_version = 22
+setting_version = 23
 type = quality
 quality_type = draft
 weight = -2
@@ -12,4 +12,43 @@ material = generic_pla
 variant = 0.4
 
 [values]
-line_width = 0.44
+# Quality
+
+
+# Walls
+
+
+# Top/Bottom
+
+
+# Infill
+
+
+# Material
+
+# Speed
+
+
+# Travel
+
+
+# Cooling
+
+# Support
+
+
+# Build Plate Adhesion
+
+
+# Mesh Fixes
+
+
+# Special Modes
+
+
+# Experimental
+
+
+# Klipper
+
+

03-cura/01-configuration/quality/flsun_v400_global_Draft_Quality.inst.cfg

@@ -1,3 +1,4 @@
+
 [general]
 version = 4
 name = Fast (Draft Quality)
@@ -11,108 +12,58 @@ weight = -2
 global_quality = True
 
 [values]
+
+# Quality
 layer_height = 0.2
 layer_height_0 = 0.2
-initial_layer_line_width_factor = 110
-adhesion_type = skirt
+line_width = =machine_nozzle_size * 1.1
 
-acceleration_enabled = False
-acceleration_travel_enabled = False
-acceleration_Layer_0 = 5000
-acceleration_print = 8000
-acceleration_topbottom = 5000
-jerk_enabled = False
+# Walls
+wall_line_count = 2
 
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
-infill_overlap = =20 if infill_sparse_density > 80 else 5
-infill_sparse_density = 10
-infill_wall_line_count = 1
-infill_enable_travel_optimization = True
-infill_wipe_dist = =line_width / 2
-infill_material_flow = =material_flow - 3
-wall_0_wipe_dist = =line_width
-zig_zaggify_infill = True
+# Top/Bottom
 
-bridge_settings_enabled = True
+# Infill
 
-support_enable = False
-support_structure = tree
-support_type = everywhere
-support_infill_rate = 10
-support_pattern = lines
-support_roof_enable = True
-support_roof_pattern = grid
-support_xy_distance = 0.16
-support_brim_line_count = 10
-support_material_flow = =material_flow - 4
-support_roof_density = 50
-support_roof_material_flow = =support_material_flow
-support_tree_bp_diameter = 10
-support_xy_distance_overhang = 0.3
-support_z_distance = 0.15
-zig_zaggify_support = True
+# Material
 
-roofing_layer_count = 1
-top_bottom_thickness = 1
-top_layers = 5
-bottom_layers = 4
+# Speed
 
-skin_monotonic = True
-skin_overlap = 20
-skirt_gap = 10
-skin_edge_support_layers = 4
+# Travel
 
-bridge_skin_speed = 60
-bridge_wall_material_flow = 100
+# Cooling
 
-fill_outline_gaps = False
 
-optimize_wall_printing_order = True
+# Support
 
-retraction_combing = noskin
 
-small_feature_speed_factor = 40
-small_hole_max_size = 9
+# Build Plate Adhesion
 
-speed_print = 120
-speed_infill = =speed_print * 1.0
-speed_support = =speed_print * 1.0
-speed_support_infill = =speed_print * 1.3
-speed_support_interface = =speed_print * 0.5
-support_interface_height = =layer_height * 2
-speed_support_roof = =speed_print * 0.5
-speed_support_bottom = =speed_print * 0.5
-support_interface_pattern = grid
-speed_travel = =speed_print * 2
-speed_layer_0 = 30
-speed_print_layer_0 = =speed_layer_0
-speed_travel_layer_0 = =speed_print_layer_0 * 2
-speed_roofing = =speed_layer_0 * 2
-speed_wall_0_roofing = =speed_roofing
-speed_wall_x_roofing = =speed_roofing
-skirt_brim_speed = =speed_print_layer_0
-speed_slowdown_layers = 3
-support_enable = False
-support_xy_distance = =line_width * 3
-support_z_distance = =layer_height * 1.5
 
-speed_z_hop = 30
+# Mesh Fixes
 
-wall_line_count = 3
-wall_overhang_angle = 35
-wall_overhang_speed_factor = 30
 
-z_seam_type = sharpest_corner
+# Special Modes
 
-retraction_retract_speed = =retraction_speed
-retraction_prime_speed = =retraction_speed / 2
 
+# Experimental
+
+# Klipper
+# This printer is using Klipper Firmware Acceleration control, Jerk control, Retraction and Input Shaping is done by the
+# firmware and does not need to be done by Cura.
+# - enable hardware retraction with G10/G11
 machine_firmware_retract = True
 klipper_retract_length = =retraction_amount
 klipper_retract_prime_length = =retraction_extra_prime_amount
-klipper_retract_prime_speed = =retraction_prime_speed
-klipper_retract_speed = =retraction_speed
 klipper_retraction_speed = =retraction_speed
+klipper_retract_speed = =retraction_retract_speed
+klipper_retract_prime_speed = =retraction_prime_speed
+# - enable pressure advance
 klipper_pressure_advance_enable = True
+klipper_pressure_advance_factor = 0.04
+klipper_smooth_time_enable = True
+klipper_smooth_time_factor = 0.04
 
-travel_avoid_supports = True
+# - disable cura acceleration and jerk control
+acceleration_enabled = False
+jerk_enabled = False

03-cura/01-configuration/variants/flsun_v400_0.4.inst.cfg

@@ -4,9 +4,156 @@ version = 4
 definition = flsun_v400
 
 [metadata]
-setting_version = 20
+setting_version = 23
 type = variant
 hardware_type = nozzle
 
 [values]
-line_width = 0.44
+# Global Settings, valid for all
+# Printing with a 0.4 nozzle size
+machine_nozzle_size = 0.4
+
+# This printer is using Klipper Firmware Acceleration control, Jerk control, Retraction and Input Shaping is done by the
+# firmware and does not need to be done by Cura.
+# - enable hardware retraction with G10/G11
+machine_firmware_retract = True
+klipper_retract_length = =retraction_amount
+klipper_retract_prime_length = =retraction_extra_prime_amount
+klipper_retraction_speed = =retraction_speed
+klipper_retract_speed = =retraction_retract_speed
+klipper_retract_prime_speed = =retraction_prime_speed
+# - disable cura acceleration and jerk control
+acceleration_enabled = False
+jerk_enabled = False
+
+
+# Quality
+
+
+# Walls
+wall_distribution_count = 2
+wall_0_wipe_dist = =machine_nozzle_size * 2
+optimize_wall_printing_order = True
+# wall oder
+inset_direction = inside_out
+# print thin walls
+fill_outline_gaps = True
+z_seam_type = sharpest_corner
+
+# Top/Bottom
+# extra skin wall count
+skin_outline_count = 2
+
+# Infill
+infill_sparse_density = 15
+infill_pattern = ='gyroid' if infill_sparse_density < 80 else 'zigzag'
+infill_wall_line_count = 1
+connect_infill_polygons = True
+skin_edge_support_layers = 2
+
+# Material
+material_print_temperature = =default_material_print_temperature
+# Already start printing when reaching this temperature, we will still have some time to heat up
+# while printing the waste lien and the skirt / brim
+material_initial_print_temperature = =default_material_print_temperature - 10
+# first layer
+material_print_temperature_layer_0 = =default_material_print_temperature
+# Cool down the nozzle when a nozzle switch or standby is expected to happen
+# Nozzle will reach this temperature at the exact moment of nozzle switch or standby start
+material_final_print_temperature = =default_material_print_temperature - 15
+# first layer
+material_bed_temperature_layer_0 = =material_bed_temperature
+
+
+# Speed
+# General Print Speed, somewhat good quality but still good speed
+speed_print = 150
+
+# Infill, can be printed faster
+speed_infill = =speed_print * 1.4
+
+# Walls print a little bit slower
+speed_wall = =speed_print * 0.8
+# outer wall, prioritize quality
+speed_wall_0 = =speed_print * 0.6
+# between outer wall and infill, maintain adhesion
+speed_wall_x = =speed_print * 0.8
+# top surface outer wall, slower for better finish
+speed_wall_0_roofing = =speed_print * 0.5
+# top surface inner wall, sligthly faster than outer wall
+speed_wall_x_roofing = =speed_print * 0.6
+# Top skin, slower to ensure smooth finish and layer bonding
+speed_roofing = =speed_print * 0.6
+# balance of flatness and time
+speed_topbottom = =speed_print * 0.6
+# support finish does not matter, but needs to maintin somewhat dimensional accuracy
+speed_support = =speed_print * 1.2
+# infill
+speed_infill = =speed_print * 1.2
+speed_support_infill = =speed_print * 1.2
+speed_support_interface = =speed_print * 0.8
+speed_support_roof = =speed_print * 0.7
+speed_support_bottom = =speed_print * 0.8
+speed_prime_tower = =speed_print * 0.7
+speed_travel = =speed_print * 1.5
+
+# Layer 0 always slow for good adhesion
+speed_layer_0 = 30
+speed_print_layer_0 = 30
+speed_travel_layer_0 = 60
+skirt_brim_speed = 30
+speed_z_hop = 10
+speed_slowdown_layers = 3
+speed_euqalize_flow_width_factor = 70
+
+# Travel
+retraction_enable = True
+retract_at_layer_change = False
+retraction_amount = 0.8
+retraction_speed = 30
+retract_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed * 0.7
+retraction_extra_prime_amount = 0
+retraction_combing = no_outer_surfaces
+retraction_combing_max_distance = 2
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+
+# Cooling
+cool_fan_speed = 80
+cool_fan_speed_min = =cool_fan_speed
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_fan_speed_0 = 0
+cool_fan_full_layer = 3
+cool_min_layer_time = 10
+cool_min_speed = 15
+cool_lift_head = True
+cool_min_temperature = =material_print_temperature - 15
+
+# Support
+support_brim_width = 5
+support_xy_distance_overhang = 0.5
+support_tower_diameter = 8
+support_angle = 60
+
+
+
+# Build Plate Adhesion
+prime_blob_enable = False
+adhesion_type = skirt
+skirt_line_count = 3
+skirt_gap = 3
+skirt_brim_minimal_length = 300
+
+# Mesh Fixes
+
+
+# Special Modes
+
+
+# Experimental
+infill_enable_travel_optimization = True
+wall_overhang_angle = 60
+bridge_settings_enabled = True
+

04-material/PETG/SUNLU/Rapid/White.md

@@ -0,0 +1,22 @@
+# PETG SUNLU Rapid White
+
+## Settings
+
+| Setting                       | Value    |
+| :---------------------------- | :------- |
+| Printing Temperature          | 245°C    |
+| Build Plate Temperature       | 70°C     |
+| Max Speed                     | 600mm/s  |
+| Flow                          | 100%     |
+| Retraction Distance           | 0.8mm    |
+| Retraction Speed              | 30mm/s   |
+| Retraction Extra Prime Amount | 0.06mm   |
+| Linear Advance Factor         | 0.04m/s² |
+
+## Prices, per 1KG
+
+- [Amazon](https://www.amazon.de/dp/B0D9NKJW22?ref=ppx_yo2ov_dt_b_fed_asin_title)
+
+| Date       | Price  |
+| :--------- | :----- |
+| 29.09.2025 | 10.22€ |

04-material/PETG/SUNLU/black.md

@@ -1,21 +0,0 @@
-# SUNLU Black PETG
-
-## Settings
-| Setting                                        | Value    |
-| :--------------------------------------------- | :------- |
-| Printing Temperature                           | 230°C    |
-| Build Plate Temperature                        | 70°C     |
-| Flow                                           | 100%     |
-| Retraction Distance                            | 0.4mm    |
-| Retraction Speed                               | 50mm/s   |
-| Retraction Extra Prime Amount                  | 0.03mm   |
-| Linear Advance Factor                          | 0.000    |
-
-## Prices
-
-https://www.3djake.de/3djake/ecopla-schwarz
-
-| Date       | Price  |
-| :--------- | :----- |
-| 21.03.2024 | 19.19€ |
-| 17.12.2024 | 17.99€ |

04-material/PLA+/SUNLU/Burly Wood.md

@@ -0,0 +1,22 @@
+# PLA+ SUNLU Burly Wood
+
+## Settings
+
+| Setting                       | Value   |
+| :---------------------------- | :------ |
+| Printing Temperature          | °C      |
+| Build Plate Temperature       | °C      |
+| Max Speed                     | 250mm/s |
+| Flow                          | 100%    |
+| Retraction Distance           | 1mm     |
+| Retraction Speed              | 20mm/s  |
+| Retraction Extra Prime Amount | 0.00mm  |
+| Linear Advance Factor         | 0.065   |
+
+## Prices
+
+- [Amazon](https://www.3djake.de/polymaker/polyterra-pla-peanut?sai=11929)
+
+| Date       | Price  |
+| :--------- | :----- |
+| 14.09.2025 | 14.99€ |

04-material/PLA+/SUNLU/black.md

@@ -1,21 +0,0 @@
-# PLA+ SUNLU Black
-
-## Settings
-
-| Setting                                        | Value    |
-| :--------------------------------------------- | :------- |
-| Printing Temperature                           | 213°C    |
-| Build Plate Temperature                        | 65°C     |
-| Flow                                           | 93.5%    |
-| Retraction Distance                            | 0.50mm   | ?
-| Retraction Speed                               | 50mm/s   | ?
-| Retraction Extra Prime Amount                  | 0.02mm   |
-| Linear Advance Factor                          | 0.04     |
-
-## Prices
-
-https://www.amazon.de/gp/product/B07Y5K1TB5?psc=1
-
-| Date       | Price  |
-| :--------- | :----- |
-| 13.12.2024 | 13.91€ |

04-material/PLA+/SUNLU/white.md

@@ -1,21 +0,0 @@
-# PLA+ SUNLU Black
-
-## Settings
-
-| Setting                                        | Value    |
-| :--------------------------------------------- | :------- |
-| Printing Temperature                           | 216°C    |
-| Build Plate Temperature                        | 65°C     |
-| Flow                                           | 91.0%    |
-| Retraction Distance                            | mm   |
-| Retraction Speed                               | m/s   |
-| Retraction Extra Prime Amount                  | mm   |
-| Linear Advance Factor                          |      |
-
-## Prices
-
-https://www.amazon.de/gp/product/B07Y5K1TB5?psc=1
-
-| Date       | Price  |
-| :--------- | :----- |
-| 21.03.2025 | 15.99€ |

04-material/PLA+/SUNLU/wood.md

@@ -1,20 +0,0 @@
-# PLA+ SUNLU Wood
-
-## Settings
-| Setting                                        | Value    |
-| :--------------------------------------------- | :------- |
-| Printing Temperature                           | 213°C    |
-| Build Plate Temperature                        | 65°C     |
-| Flow                                           | 93.5%    |
-| Retraction Distance                            | 0.55mm   |
-| Retraction Speed                               | 50mm/s   |
-| Retraction Extra Prime Amount                  | 0.03mm   |
-| Linear Advance Factor                          | 0.020    |
-
-## Prices
-
-https://www.amazon.de/gp/product/B07Y5K1TB5?psc=1
-
-| Date       | Price  |
-| :--------- | :----- |
-| 29.07.2024 | 17.99€ |

04-material/PLA/GEETECH/yellow.md

@@ -1,21 +0,0 @@
-# PLA GEETECH Yellow
-
-## Settings
-| Setting                                        | Value    |
-| :--------------------------------------------- | :------- |
-| Printing Temperature                           | 205°C    |
-| Build Plate Temperature                        | 65°C     |
-| Flow                                           | 94%      |
-| Retraction Distance                            | 0.55mm   |
-| Retraction Speed                               | 50mm/s   |
-| Retraction Extra Prime Amount                  | 0.03mm   |
-| Linear Advance Factor                          | 0.020    |
-
-## Prices
-
-https://www.amazon.de/gp/product/B075YHL7HQ?psc=1
-
-| Date       | Price  |
-| :--------- | :----- |
-| 26.08.2023 | 20.79€ |
-| 02.09.2024 | 17.99€ |

04-material/PLA/Polymaker/Polyterra/Peanut.md

@@ -0,0 +1,22 @@
+# PLA Polymaker Polyterra Peanut
+
+## Settings
+
+| Setting                       | Value   |
+| :---------------------------- | :------ |
+| Printing Temperature          | 210°C   |
+| Build Plate Temperature       | 60°C    |
+| Max Speed                     | 100mm/s |
+| Flow                          | 100%    |
+| Retraction Distance           | 1mm     |
+| Retraction Speed              | 20mm/s  |
+| Retraction Extra Prime Amount | 0.00mm  |
+| Linear Advance Factor         | 0.065   |
+
+## Prices
+
+- [3DJake](https://www.3djake.de/polymaker/polyterra-pla-peanut?sai=11929)
+
+| Date       | Price  |
+| :--------- | :----- |
+| 14.09.2025 | 14.99€ |

04-material/ecoPLA/3dJake/black.md

@@ -1,22 +0,0 @@
-# ecoPLA 3dJake Black
-
-## Settings
-
-| Setting                                        | Value    |
-| :--------------------------------------------- | :------- |
-| Printing Temperature                           | 230°C    |
-| Build Plate Temperature                        | 70°C     |
-| Flow                                           | 91%      |
-| Retraction Distance                            | 1mm      |
-| Retraction Speed                               | 50mm/s   |
-| Retraction Extra Prime Amount                  | 0.03mm   |
-| Linear Advance Factor                          | 0.025    |
-
-## Prices
-
-https://www.3djake.de/3djake/ecopla-schwarz
-
-| Date       | Price  |
-| :--------- | :----- |
-| 08.01.2024 | 19.99€ |
-| 12.10.2024 | 19.99€ |