added flsun models

03-cura/01-configuration/quality/flsun_v400_global_Draft_Quality.inst.cfg

@@ -14,6 +14,7 @@ global_quality = True
 layer_height = 0.2
 layer_height_0 = 0.2
 initial_layer_line_width_factor = 110
+adhesion_type = skirt
 
 acceleration_enabled = False
 acceleration_travel_enabled = False
@@ -24,10 +25,11 @@ jerk_enabled = False
 
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
 infill_overlap = =20 if infill_sparse_density > 80 else 5
-infill_sparse_density = 20
+infill_sparse_density = 10
 infill_wall_line_count = 1
 infill_enable_travel_optimization = True
 infill_wipe_dist = =line_width / 2
+infill_material_flow = =material_flow - 3
 wall_0_wipe_dist = =line_width
 zig_zaggify_infill = True
 
@@ -41,6 +43,14 @@ support_pattern = lines
 support_roof_enable = True
 support_roof_pattern = grid
 support_xy_distance = 0.16
+support_brim_line_count = 10
+support_material_flow = =material_flow - 4
+support_roof_density = 50
+support_roof_material_flow = =support_material_flow
+support_tree_bp_diameter = 10
+support_xy_distance_overhang = 0.3
+support_z_distance = 0.15
+zig_zaggify_support = True
 
 roofing_layer_count = 1
 top_bottom_thickness = 1
@@ -59,12 +69,12 @@ fill_outline_gaps = False
 
 optimize_wall_printing_order = True
 
-retraction_combing = off
+retraction_combing = noskin
 
 small_feature_speed_factor = 40
 small_hole_max_size = 9
 
-speed_print = 200
+speed_print = 120
 speed_infill = =speed_print * 1.0
 speed_support = =speed_print * 1.0
 speed_support_infill = =speed_print * 1.3
@@ -80,6 +90,7 @@ speed_wall_0_roofing = =speed_roofing
 speed_wall_x_roofing = =speed_roofing
 skirt_brim_speed = =speed_print_layer_0
 speed_slowdown_layers = 3
+support_enable = False
 
 speed_z_hop = 30
 

04-material/PLA/GEETECH/yellow.md

@@ -3,12 +3,12 @@
 ## Settings
 | Setting                                        | Value    |
 | :--------------------------------------------- | :------- |
-| Printing Temperature                           | 200°C    |
+| Printing Temperature                           | 205°C    |
-| Build Plate Temperature                        | 60°C     |
+| Build Plate Temperature                        | 65°C     |
 | Flow                                           | 94%      |
-| Retraction Distance                            | 0.3mm    |
+| Retraction Distance                            | 0.55mm   |
 | Retraction Speed                               | 50mm/s   |
-| Retraction Extra Prime Amount                  | 0.05mm   |
+| Retraction Extra Prime Amount                  | 0.03mm   |
 | Linear Advance Factor                          | 0.020    |
 
 ## Prices