[general]
version = 4
name = Fast (Draft Quality)
definition = flsun_v400

[metadata]
setting_version = 23
type = quality
quality_type = draft
weight = -2
global_quality = True

[values]
layer_height = 0.2
layer_height_0 = 0.2
initial_layer_line_width_factor = 110
adhesion_type = skirt

acceleration_enabled = False
acceleration_travel_enabled = False
acceleration_Layer_0 = 5000
acceleration_print = 8000
acceleration_topbottom = 5000
jerk_enabled = False

infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
infill_overlap = =20 if infill_sparse_density > 80 else 5
infill_sparse_density = 10
infill_wall_line_count = 1
infill_enable_travel_optimization = True
infill_wipe_dist = =line_width / 2
infill_material_flow = =material_flow - 3
wall_0_wipe_dist = =line_width
zig_zaggify_infill = True

bridge_settings_enabled = True

support_enable = False
support_structure = tree
support_type = everywhere
support_infill_rate = 10
support_pattern = lines
support_roof_enable = True
support_roof_pattern = grid
support_xy_distance = 0.16
support_brim_line_count = 10
support_material_flow = =material_flow - 4
support_roof_density = 50
support_roof_material_flow = =support_material_flow
support_tree_bp_diameter = 10
support_xy_distance_overhang = 0.3
support_z_distance = 0.15
zig_zaggify_support = True

roofing_layer_count = 1
top_bottom_thickness = 1
top_layers = 5
bottom_layers = 4

skin_monotonic = True
skin_overlap = 20
skirt_gap = 10
skin_edge_support_layers = 4

bridge_skin_speed = 60
bridge_wall_material_flow = 100

fill_outline_gaps = False

optimize_wall_printing_order = True

retraction_combing = noskin

small_feature_speed_factor = 40
small_hole_max_size = 9

speed_print = 120
speed_infill = =speed_print * 1.0
speed_support = =speed_print * 1.0
speed_support_infill = =speed_print * 1.3
speed_support_interface = =speed_print * 0.5
support_interface_height = =layer_height * 2
speed_support_roof = =speed_print * 0.5
speed_support_bottom = =speed_print * 0.5
support_interface_pattern = grid
speed_travel = =speed_print * 2
speed_layer_0 = 30
speed_print_layer_0 = =speed_layer_0
speed_travel_layer_0 = =speed_print_layer_0 * 2
speed_roofing = =speed_layer_0 * 2
speed_wall_0_roofing = =speed_roofing
speed_wall_x_roofing = =speed_roofing
skirt_brim_speed = =speed_print_layer_0
speed_slowdown_layers = 3
support_enable = False
support_xy_distance = =line_width * 3
support_z_distance = =layer_height * 1.5

speed_z_hop = 30

wall_line_count = 3
wall_overhang_angle = 35
wall_overhang_speed_factor = 30

z_seam_type = sharpest_corner

retraction_retract_speed = =retraction_speed
retraction_prime_speed = =retraction_speed / 2

machine_firmware_retract = True
klipper_retract_length = =retraction_amount
klipper_retract_prime_length = =retraction_extra_prime_amount
klipper_retract_prime_speed = =retraction_prime_speed
klipper_retract_speed = =retraction_speed
klipper_retraction_speed = =retraction_speed
klipper_pressure_advance_enable = True

travel_avoid_supports = True