[general]
version = 4
name = Fast (Draft Quality)
definition = flsun_v400

[metadata]
setting_version = 23
type = quality
quality_type = draft
weight = -2
global_quality = True

[values]
layer_height = 0.2
layer_height_0 = 0.2
initial_layer_line_width_factor = 110

acceleration_enabled = False
acceleration_travel_enabled = False
acceleration_Layer_0 = 5000
acceleration_print = 8000
acceleration_topbottom = 5000
jerk_enabled = False

infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
infill_overlap = =20 if infill_sparse_density > 80 else 5
infill_sparse_density = 20
infill_wall_line_count = 1
zig_zaggify_infill = True

bridge_settings_enabled = True

support_enable = False
support_structure = tree
support_type = everywhere
support_infill_rate = 10
support_pattern = lines
support_roof_enable = True
support_roof_pattern = grid
support_xy_distance = 0.16

roofing_layer_count = 1
top_bottom_thickness = 1
top_layers = 5
bottom_layers = 4

skin_monotonic = True
skin_overlap = 15
skirt_gap = 10

bridge_skin_speed = 60
bridge_wall_material_flow = 100

fill_outline_gaps = False

optimize_wall_printing_order = True

retraction_combing = off

small_feature_speed_factor = 40
small_hole_max_size = 9

speed_print = 200
speed_infill = =speed_print * 1.5
speed_support = =speed_print * 1.5
speed_support_infill = =speed_print * 1.5
speed_support_interface = =speed_print * 0.5
speed_support_roof = =speed_print * 0.5
speed_support_bottom = =speed_print * 0.5
speed_travel = =speed_print * 2
speed_layer_0 = 30
speed_print_layer_0 = =speed_layer_0
speed_travel_layer_0 = =speed_print_layer_0 * 2
skirt_brim_speed = =speed_print_layer_0
speed_slowdown_layers = 3

speed_z_hop = 30

wall_line_count = 3
wall_overhang_angle = 35
wall_overhang_speed_factor = 30

z_seam_type = sharpest_corner

retraction_amount = 0.7
retraction_speed = 40
retraction_retract_speed = =retraction_speed
retraction_prime_speed = =retraction_speed / 2
retraction_extra_prime_amount = 0.05

machine_firmware_retract = True
klipper_retract_length = =retraction_amount
klipper_retract_prime_length = =retraction_extra_prime_amount
klipper_retract_prime_speed = =retraction_prime_speed
klipper_retract_speed = =retraction_speed
klipper_retraction_speed = =retraction_speed
klipper_pressure_advance_enable = True

material_flow = 88