# _____ __ _ _ _ # / ____| / _(_) | | (_) # | | ___ _ __ | |_ _ __ _ _ _ _ __ __ _| |_ _ ___ _ __ ___ # | | / _ \| '_ \| _| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \/ __| # | |___| (_) | | | | | | | (_| | |_| | | | (_| | |_| | (_) | | | \__ \ # \_____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_|___/ # __/ | # |___/ # # KlipperScreen Configurations # # Guislain Cyril ######################################## # Preheat Settings ######################################## [preheat PLA] extruder = 210 heater_bed = 65 [preheat PETG] extruder = 240 heater_bed = 80 [preheat FLEX] extruder = 210 heater_bed = 0 [preheat ABS] extruder = 245 heater_bed = 90 [preheat cooldown] gcode: M107 ######################################## # Multiple Instances Settings ######################################## # For Multi Instances using, uncomment and edit lines you need by removing the '#' symbol. # If multiple printers are defined, this can be set the name of the one to show at startup. [main] #default_printer: FLSUN V400 ######################################## # Printer 1 Settings ######################################## # Define printer name. Name is anything after the first printer word. [printer FLSUN V400] # Define the moonraker host/port if different from 127.0.0.1 and 7125. moonraker_host: 127.0.0.1 moonraker_port: 7125 # Override the movement speed and set a specific for this printer. # These setting overrides the settings configured in the UI. If specified, # the values configured in the UI will not be used. move_speed_xy: 80 move_speed_z: 80 # Define distances and speeds for the extrude panel. extrude_distances: 5, 10, 15, 25 extrude_speeds: 1, 2, 5, 10 ######################################## # Printer 2 Settings ######################################## # For Multi Instances using, uncomment and edit lines you need by removing the '#' symbol. # Define printer name. Name is anything after the first printer word. #[printer Printer 2] # Define the moonraker host/port if different from 127.0.0.1 and 7125. #moonraker_host: 127.0.0.1 #moonraker_port: 7126 # Override the movement speed and set a specific for this printer. # These setting overrides the settings configured in the UI. If specified, # the values configured in the UI will not be used. #move_speed_xy: 80 #move_speed_z: 80 # Define distances and speeds for the extrude panel. #extrude_distances: 5, 10, 15, 25 #extrude_speeds: 1, 2, 5, 10 ######################################## # Printer 3 Settings ######################################## # For Multi Instances using, uncomment and edit lines you need by removing the '#' symbol. # Define printer name. Name is anything after the first printer word. #[printer Printer 3] # Define the moonraker host/port if different from 127.0.0.1 and 7125. #moonraker_host: 127.0.0.1 #moonraker_port: 7127 # Override the movement speed and set a specific for this printer. # These setting overrides the settings configured in the UI. If specified, # the values configured in the UI will not be used. #move_speed_xy: 80 #move_speed_z: 80 # Define distances and speeds for the extrude panel. #extrude_distances: 5, 10, 15, 25 #extrude_speeds: 1, 2, 5, 10 #~# --- Do not edit below this line. This section is auto generated --- #~# #~# #~# [main] #~# screen_blanking_printing = 1800 #~# show_heater_power = True #~# move_speed_xy = 80 #~# move_speed_z = 80 #~# print_sort_dir = date_desc #~# #~# [displayed_macros FLSUN V400] #~# bed_glow = False #~# cancel_print = False #~# bed_progress = False #~# end_print = False #~# m205 = False #~# m204 = False #~# hotend_glow = False #~# load_filament = False #~# led_logo_on = False #~# hotend_progress = False #~# neopixel_orange = False #~# neopixel_violet = False #~# pause = False #~# percent_glow = False #~# neopixel_green = False #~# m600 = False #~# move_to_z0 = False #~# neopixel_off = False #~# percent_progress = False #~# neopixel_display = False #~# neopixel_blue = False #~# resume = False #~# z-down = False #~# speed_glow = False #~# pressure_advance = False #~# z-up = False #~# set_gcode_offset = False #~# neopixel_on = False #~# unload_filament = False #~# speed_progress = False #~# neopixel_yellow = False #~# start_print = False #~# adxl_axe_x = False #~# adxl_axe_y = False #~# adxl_noise = False #~# adxl_test = False #~# neopixel_red = False #~# get_timelapse_setup = False #~# hyperlapse = False #~# test_stream_delay = False #~# timelapse_take_frame = False #~#