fzechert/flsun-v400
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

updated configuration files after system update

Browse Source
This commit is contained in:
Frank Zechert 2025-04-27 20:21:58 +02:00
parent 9db0a2beba
commit 7d5d761267
4 changed files with 23 additions and 140 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
01-firmware/Robin_nano35.bin Normal file
View File

Binary file not shown.

4
02-klipper/01-configuration/KlipperScreen.conf
View File

@ -119,6 +119,7 @@ extrude_speeds: 1, 2, 5, 10
#~# --- Do not edit below this line. This section is auto generated --- #~# #~# --- Do not edit below this line. This section is auto generated --- #~#
#~# #~#
#~# [main] #~# [main]
#~# print_estimate_method = file
#~# screen_blanking_printing = 1800 #~# screen_blanking_printing = 1800
#~# show_heater_power = True #~# show_heater_power = True
#~# move_speed_xy = 80 #~# move_speed_xy = 80
@ -167,4 +168,7 @@ extrude_speeds: 1, 2, 5, 10
#~# hyperlapse = False #~# hyperlapse = False
#~# test_stream_delay = False #~# test_stream_delay = False
#~# timelapse_take_frame = False #~# timelapse_take_frame = False
#~# security_offset = False
#~# save = False
#~# z_offset_calibration = False
#~# #~#

158
02-klipper/01-configuration/printer.cfg
View File

@ -64,6 +64,10 @@
[include timelapse.cfg] #Enable if you want to use Timelapse [include timelapse.cfg] #Enable if you want to use Timelapse
#[include neopixels.cfg] #Enable if you want to use some Neopixels macros #[include neopixels.cfg] #Enable if you want to use some Neopixels macros
########################################
# Enable Exclude Objects
########################################
[exclude_object]
######################################## ########################################
# Printer Settings # Printer Settings
@ -80,7 +84,7 @@ max_z_velocity: 100
max_z_accel: 1500 max_z_accel: 1500
minimum_z_position: -25 minimum_z_position: -25
print_radius: 152 print_radius: 152
#delta_radius: 152 delta_radius: 152
######################################## ########################################
@ -97,9 +101,9 @@ endstop_pin: ^PA15
homing_speed: 50 homing_speed: 50
homing_retract_dist: 5.0 homing_retract_dist: 5.0
homing_retract_speed: 10 homing_retract_speed: 10
#angle: 210 angle: 210
#position_endstop: 415.0 position_endstop: 415.0
#arm_length = 345.0 arm_length = 345.0
[tmc2209 stepper_a] [tmc2209 stepper_a]
uart_pin: PD5 uart_pin: PD5
@ -123,7 +127,7 @@ enable_pin: !PE1
microsteps: 64 # If you encounter an error while measuring the resonances. Replace the microsteps to 16 just for the duration of the test. microsteps: 64 # If you encounter an error while measuring the resonances. Replace the microsteps to 16 just for the duration of the test.
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^PA12 endstop_pin: ^PA12
#angle: 330 angle: 330
[tmc2209 stepper_b] [tmc2209 stepper_b]
uart_pin: PD7 uart_pin: PD7
@ -147,7 +151,7 @@ enable_pin: !PB8
microsteps: 64 # If you encounter an error while measuring the resonances. Replace the microsteps to 16 just for the duration of the test. microsteps: 64 # If you encounter an error while measuring the resonances. Replace the microsteps to 16 just for the duration of the test.
rotation_distance: 40 rotation_distance: 40
endstop_pin: ^PC4 endstop_pin: ^PC4
#angle: 90 angle: 90
[tmc2209 stepper_c] [tmc2209 stepper_c]
uart_pin: PD4 uart_pin: PD4
@ -181,10 +185,10 @@ max_extrude_cross_section: 50
max_extrude_only_distance: 800 max_extrude_only_distance: 800
#pressure_advance: 0.04 #pressure_advance: 0.04
#pressure_advance_smooth_time: 0.040 #pressure_advance_smooth_time: 0.040
#control = pid control = pid
#pid_kp = 17.501 pid_kp = 17.501
#pid_ki = 0.711 pid_ki = 0.711
#pid_kd = 107.630 pid_kd = 107.630
[tmc2209 extruder] [tmc2209 extruder]
uart_pin: PD9 uart_pin: PD9
@ -207,10 +211,10 @@ sensor_pin: PC0
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
min_temp: -5 min_temp: -5
max_temp: 120 max_temp: 120
#control = pid control = pid
#pid_kp = 64.044 pid_kp = 64.044
#pid_ki = 3.812 pid_ki = 3.812
#pid_kd = 268.984 pid_kd = 268.984
######################################## ########################################
@ -243,7 +247,7 @@ heater_temp: 50.0
pin: !PA11 pin: !PA11
x_offset: 0 x_offset: 0
y_offset: 0 y_offset: 0
#z_offset: 0 z_offset: 0
speed: 10 speed: 10
lift_speed: 50 lift_speed: 50
samples: 8 samples: 8
@ -386,127 +390,3 @@ value: 1
#initial_RED: 1.0 #initial_RED: 1.0
#initial_GREEN: 1.0 #initial_GREEN: 1.0
#initial_BLUE: 1.0 #initial_BLUE: 1.0
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [probe]
#*# z_offset = 18.168
#*#
#*# [printer]
#*# delta_radius = 161.541152
#*#
#*# [stepper_a]
#*# angle = 209.994009
#*# arm_length = 343.333393
#*# position_endstop = 420.376210
#*#
#*# [stepper_b]
#*# angle = 329.645649
#*# arm_length = 344.331987
#*# position_endstop = 420.756046
#*#
#*# [stepper_c]
#*# angle = 90.000000
#*# arm_length = 344.669204
#*# position_endstop = 419.508380
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 74.784
#*# pid_ki = 2.652
#*# pid_kd = 527.225
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 21.053
#*# pid_ki = 1.105
#*# pid_kd = 100.266
#*#
#*# [endstop_phase stepper_a]
#*# trigger_phase = 74/256
#*#
#*# [endstop_phase stepper_b]
#*# trigger_phase = 245/256
#*#
#*# [endstop_phase stepper_c]
#*# trigger_phase = 206/256
#*#
#*# [delta_calibrate]
#*# height0 = 18.168
#*# height0_pos = 128667.375,128842.375,128439.875
#*# height1 = 18.168
#*# height1_pos = 154161.875,154427.000,115783.875
#*# height2 = 18.168
#*# height2_pos = 126664.375,168756.375,126450.375
#*# height3 = 18.168
#*# height3_pos = 116407.625,149915.250,149567.875
#*# height4 = 18.168
#*# height4_pos = 125537.375,125651.875,155145.875
#*# height5 = 18.168
#*# height5_pos = 146009.125,117173.625,145726.125
#*# height6 = 18.168
#*# height6_pos = 161542.000,126235.000,125771.000
#*# distance0 = 64.916
#*# distance0_pos1 = 133760.055,135025.270,134656.715
#*# distance0_pos2 = 125622.695,143427.364,143109.896
#*# distance1 = 64.964
#*# distance1_pos1 = 134142.237,134259.915,135041.382
#*# distance1_pos2 = 131208.634,131268.761,149862.826
#*# distance2 = 65.09400000000001
#*# distance2_pos1 = 134909.285,133883.101,134656.715
#*# distance2_pos2 = 143404.654,125761.767,143109.896
#*# distance3 = 64.86
#*# distance3_pos1 = 135294.173,134267.191,133891.923
#*# distance3_pos2 = 150167.980,131377.844,130953.810
#*# distance4 = 64.986
#*# distance4_pos1 = 134907.437,135032.603,133511.763
#*# distance4_pos2 = 143373.363,143551.453,125396.095
#*# distance5 = 65.096
#*# distance5_pos1 = 134140.403,135413.904,133891.923
#*# distance5_pos2 = 131181.142,150249.178,130953.810
#*# distance6 = 64.966
#*# distance6_pos1 = 126255.395,141679.009,142603.819
#*# distance6_pos2 = 131802.918,130754.973,149226.859
#*# distance7 = 65.042
#*# distance7_pos1 = 131874.976,130830.442,147969.427
#*# distance7_pos2 = 143656.328,125974.934,142105.296
#*# distance8 = 64.98400000000001
#*# distance8_pos1 = 142894.681,126395.826,141358.019
#*# distance8_pos2 = 149528.288,131971.161,130436.606
#*# distance9 = 65.07
#*# distance9_pos1 = 148265.779,132040.434,130508.549
#*# distance9_pos2 = 142365.402,143799.580,125605.775
#*# distance10 = 64.938
#*# distance10_pos1 = 141616.667,143036.549,126026.383
#*# distance10_pos2 = 130663.479,149608.198,131546.374
#*# distance11 = 65.096
#*# distance11_pos1 = 130736.495,148349.483,131619.115
#*# distance11_pos2 = 125833.738,142422.526,143361.643
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896
#*# -0.059330, -0.059330, -0.059330, -0.059330, -0.067872, -0.022435, 0.017308, 0.033277, 0.055371, 0.350995, 0.350995, 0.350995, 0.350995
#*# 0.008108, 0.008108, 0.008108, -0.030591, -0.032114, 0.015006, 0.013111, 0.021862, 0.038866, 0.088963, 0.067147, 0.067147, 0.067147
#*# 0.076988, 0.076988, 0.014473, 0.004642, 0.012713, 0.013011, 0.011547, 0.029096, 0.013954, 0.040260, 0.053985, 0.044658, 0.044658
#*# 0.058240, 0.058240, 0.009890, -0.009780, -0.009101, -0.017454, 0.011496, 0.000848, 0.024160, 0.028844, 0.013092, 0.051052, 0.051052
#*# 0.098491, 0.098491, 0.027282, 0.017226, 0.013297, 0.032427, 0.002743, 0.016712, 0.040042, 0.030823, 0.021936, -0.025504, -0.025504
#*# 0.118502, 0.089060, 0.058103, 0.024333, 0.026867, 0.000293, 0.000000, 0.039546, 0.011935, 0.024922, 0.032961, -0.005448, -0.065631
#*# 0.084782, 0.084782, 0.031679, 0.057877, -0.001049, 0.036571, 0.049042, 0.034882, 0.031147, 0.012871, -0.031739, -0.022315, -0.022315
#*# 0.074070, 0.074070, 0.043000, 0.010733, 0.004522, 0.052281, 0.060864, 0.033685, 0.046425, 0.062195, 0.021025, -0.022662, -0.022662
#*# 0.038321, 0.038321, 0.016001, 0.026090, 0.013819, 0.027285, 0.034729, 0.042197, 0.065762, 0.056596, 0.010150, -0.046115, -0.046115
#*# 0.003236, 0.003236, 0.003236, 0.009619, 0.006156, 0.035293, 0.002207, 0.081087, 0.038801, 0.052112, 0.010090, 0.010090, 0.010090
#*# -0.024296, -0.024296, -0.024296, -0.024296, 0.006547, -0.004994, 0.033552, 0.044608, 0.046647, 0.079277, 0.079277, 0.079277, 0.079277
#*# 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148
#*# x_count = 13
#*# y_count = 13
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = bicubic
#*# tension = 0.1
#*# min_x = -147.0
#*# max_x = 147.0
#*# min_y = -147.0
#*# max_y = 147.0

1
02-klipper/01-configuration/variables.cfg
View File

@ -1,3 +1,2 @@
[Variables] [Variables]
zoffset = {'z': 0.08999999999999866}