updated configuration files after system update
This commit is contained in:
parent
9db0a2beba
commit
7d5d761267
BIN
01-firmware/Robin_nano35.bin
Normal file
BIN
01-firmware/Robin_nano35.bin
Normal file
Binary file not shown.
@ -119,6 +119,7 @@ extrude_speeds: 1, 2, 5, 10
|
||||
#~# --- Do not edit below this line. This section is auto generated --- #~#
|
||||
#~#
|
||||
#~# [main]
|
||||
#~# print_estimate_method = file
|
||||
#~# screen_blanking_printing = 1800
|
||||
#~# show_heater_power = True
|
||||
#~# move_speed_xy = 80
|
||||
@ -167,4 +168,7 @@ extrude_speeds: 1, 2, 5, 10
|
||||
#~# hyperlapse = False
|
||||
#~# test_stream_delay = False
|
||||
#~# timelapse_take_frame = False
|
||||
#~# security_offset = False
|
||||
#~# save = False
|
||||
#~# z_offset_calibration = False
|
||||
#~#
|
||||
|
||||
@ -64,6 +64,10 @@
|
||||
[include timelapse.cfg] #Enable if you want to use Timelapse
|
||||
#[include neopixels.cfg] #Enable if you want to use some Neopixels macros
|
||||
|
||||
########################################
|
||||
# Enable Exclude Objects
|
||||
########################################
|
||||
[exclude_object]
|
||||
|
||||
########################################
|
||||
# Printer Settings
|
||||
@ -80,7 +84,7 @@ max_z_velocity: 100
|
||||
max_z_accel: 1500
|
||||
minimum_z_position: -25
|
||||
print_radius: 152
|
||||
#delta_radius: 152
|
||||
delta_radius: 152
|
||||
|
||||
|
||||
########################################
|
||||
@ -97,9 +101,9 @@ endstop_pin: ^PA15
|
||||
homing_speed: 50
|
||||
homing_retract_dist: 5.0
|
||||
homing_retract_speed: 10
|
||||
#angle: 210
|
||||
#position_endstop: 415.0
|
||||
#arm_length = 345.0
|
||||
angle: 210
|
||||
position_endstop: 415.0
|
||||
arm_length = 345.0
|
||||
|
||||
[tmc2209 stepper_a]
|
||||
uart_pin: PD5
|
||||
@ -123,7 +127,7 @@ enable_pin: !PE1
|
||||
microsteps: 64 # If you encounter an error while measuring the resonances. Replace the microsteps to 16 just for the duration of the test.
|
||||
rotation_distance: 40
|
||||
endstop_pin: ^PA12
|
||||
#angle: 330
|
||||
angle: 330
|
||||
|
||||
[tmc2209 stepper_b]
|
||||
uart_pin: PD7
|
||||
@ -147,7 +151,7 @@ enable_pin: !PB8
|
||||
microsteps: 64 # If you encounter an error while measuring the resonances. Replace the microsteps to 16 just for the duration of the test.
|
||||
rotation_distance: 40
|
||||
endstop_pin: ^PC4
|
||||
#angle: 90
|
||||
angle: 90
|
||||
|
||||
[tmc2209 stepper_c]
|
||||
uart_pin: PD4
|
||||
@ -181,10 +185,10 @@ max_extrude_cross_section: 50
|
||||
max_extrude_only_distance: 800
|
||||
#pressure_advance: 0.04
|
||||
#pressure_advance_smooth_time: 0.040
|
||||
#control = pid
|
||||
#pid_kp = 17.501
|
||||
#pid_ki = 0.711
|
||||
#pid_kd = 107.630
|
||||
control = pid
|
||||
pid_kp = 17.501
|
||||
pid_ki = 0.711
|
||||
pid_kd = 107.630
|
||||
|
||||
[tmc2209 extruder]
|
||||
uart_pin: PD9
|
||||
@ -207,10 +211,10 @@ sensor_pin: PC0
|
||||
sensor_type: EPCOS 100K B57560G104F
|
||||
min_temp: -5
|
||||
max_temp: 120
|
||||
#control = pid
|
||||
#pid_kp = 64.044
|
||||
#pid_ki = 3.812
|
||||
#pid_kd = 268.984
|
||||
control = pid
|
||||
pid_kp = 64.044
|
||||
pid_ki = 3.812
|
||||
pid_kd = 268.984
|
||||
|
||||
|
||||
########################################
|
||||
@ -243,7 +247,7 @@ heater_temp: 50.0
|
||||
pin: !PA11
|
||||
x_offset: 0
|
||||
y_offset: 0
|
||||
#z_offset: 0
|
||||
z_offset: 0
|
||||
speed: 10
|
||||
lift_speed: 50
|
||||
samples: 8
|
||||
@ -386,127 +390,3 @@ value: 1
|
||||
#initial_RED: 1.0
|
||||
#initial_GREEN: 1.0
|
||||
#initial_BLUE: 1.0
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [probe]
|
||||
#*# z_offset = 18.168
|
||||
#*#
|
||||
#*# [printer]
|
||||
#*# delta_radius = 161.541152
|
||||
#*#
|
||||
#*# [stepper_a]
|
||||
#*# angle = 209.994009
|
||||
#*# arm_length = 343.333393
|
||||
#*# position_endstop = 420.376210
|
||||
#*#
|
||||
#*# [stepper_b]
|
||||
#*# angle = 329.645649
|
||||
#*# arm_length = 344.331987
|
||||
#*# position_endstop = 420.756046
|
||||
#*#
|
||||
#*# [stepper_c]
|
||||
#*# angle = 90.000000
|
||||
#*# arm_length = 344.669204
|
||||
#*# position_endstop = 419.508380
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 74.784
|
||||
#*# pid_ki = 2.652
|
||||
#*# pid_kd = 527.225
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 21.053
|
||||
#*# pid_ki = 1.105
|
||||
#*# pid_kd = 100.266
|
||||
#*#
|
||||
#*# [endstop_phase stepper_a]
|
||||
#*# trigger_phase = 74/256
|
||||
#*#
|
||||
#*# [endstop_phase stepper_b]
|
||||
#*# trigger_phase = 245/256
|
||||
#*#
|
||||
#*# [endstop_phase stepper_c]
|
||||
#*# trigger_phase = 206/256
|
||||
#*#
|
||||
#*# [delta_calibrate]
|
||||
#*# height0 = 18.168
|
||||
#*# height0_pos = 128667.375,128842.375,128439.875
|
||||
#*# height1 = 18.168
|
||||
#*# height1_pos = 154161.875,154427.000,115783.875
|
||||
#*# height2 = 18.168
|
||||
#*# height2_pos = 126664.375,168756.375,126450.375
|
||||
#*# height3 = 18.168
|
||||
#*# height3_pos = 116407.625,149915.250,149567.875
|
||||
#*# height4 = 18.168
|
||||
#*# height4_pos = 125537.375,125651.875,155145.875
|
||||
#*# height5 = 18.168
|
||||
#*# height5_pos = 146009.125,117173.625,145726.125
|
||||
#*# height6 = 18.168
|
||||
#*# height6_pos = 161542.000,126235.000,125771.000
|
||||
#*# distance0 = 64.916
|
||||
#*# distance0_pos1 = 133760.055,135025.270,134656.715
|
||||
#*# distance0_pos2 = 125622.695,143427.364,143109.896
|
||||
#*# distance1 = 64.964
|
||||
#*# distance1_pos1 = 134142.237,134259.915,135041.382
|
||||
#*# distance1_pos2 = 131208.634,131268.761,149862.826
|
||||
#*# distance2 = 65.09400000000001
|
||||
#*# distance2_pos1 = 134909.285,133883.101,134656.715
|
||||
#*# distance2_pos2 = 143404.654,125761.767,143109.896
|
||||
#*# distance3 = 64.86
|
||||
#*# distance3_pos1 = 135294.173,134267.191,133891.923
|
||||
#*# distance3_pos2 = 150167.980,131377.844,130953.810
|
||||
#*# distance4 = 64.986
|
||||
#*# distance4_pos1 = 134907.437,135032.603,133511.763
|
||||
#*# distance4_pos2 = 143373.363,143551.453,125396.095
|
||||
#*# distance5 = 65.096
|
||||
#*# distance5_pos1 = 134140.403,135413.904,133891.923
|
||||
#*# distance5_pos2 = 131181.142,150249.178,130953.810
|
||||
#*# distance6 = 64.966
|
||||
#*# distance6_pos1 = 126255.395,141679.009,142603.819
|
||||
#*# distance6_pos2 = 131802.918,130754.973,149226.859
|
||||
#*# distance7 = 65.042
|
||||
#*# distance7_pos1 = 131874.976,130830.442,147969.427
|
||||
#*# distance7_pos2 = 143656.328,125974.934,142105.296
|
||||
#*# distance8 = 64.98400000000001
|
||||
#*# distance8_pos1 = 142894.681,126395.826,141358.019
|
||||
#*# distance8_pos2 = 149528.288,131971.161,130436.606
|
||||
#*# distance9 = 65.07
|
||||
#*# distance9_pos1 = 148265.779,132040.434,130508.549
|
||||
#*# distance9_pos2 = 142365.402,143799.580,125605.775
|
||||
#*# distance10 = 64.938
|
||||
#*# distance10_pos1 = 141616.667,143036.549,126026.383
|
||||
#*# distance10_pos2 = 130663.479,149608.198,131546.374
|
||||
#*# distance11 = 65.096
|
||||
#*# distance11_pos1 = 130736.495,148349.483,131619.115
|
||||
#*# distance11_pos2 = 125833.738,142422.526,143361.643
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896, 0.001896
|
||||
#*# -0.059330, -0.059330, -0.059330, -0.059330, -0.067872, -0.022435, 0.017308, 0.033277, 0.055371, 0.350995, 0.350995, 0.350995, 0.350995
|
||||
#*# 0.008108, 0.008108, 0.008108, -0.030591, -0.032114, 0.015006, 0.013111, 0.021862, 0.038866, 0.088963, 0.067147, 0.067147, 0.067147
|
||||
#*# 0.076988, 0.076988, 0.014473, 0.004642, 0.012713, 0.013011, 0.011547, 0.029096, 0.013954, 0.040260, 0.053985, 0.044658, 0.044658
|
||||
#*# 0.058240, 0.058240, 0.009890, -0.009780, -0.009101, -0.017454, 0.011496, 0.000848, 0.024160, 0.028844, 0.013092, 0.051052, 0.051052
|
||||
#*# 0.098491, 0.098491, 0.027282, 0.017226, 0.013297, 0.032427, 0.002743, 0.016712, 0.040042, 0.030823, 0.021936, -0.025504, -0.025504
|
||||
#*# 0.118502, 0.089060, 0.058103, 0.024333, 0.026867, 0.000293, 0.000000, 0.039546, 0.011935, 0.024922, 0.032961, -0.005448, -0.065631
|
||||
#*# 0.084782, 0.084782, 0.031679, 0.057877, -0.001049, 0.036571, 0.049042, 0.034882, 0.031147, 0.012871, -0.031739, -0.022315, -0.022315
|
||||
#*# 0.074070, 0.074070, 0.043000, 0.010733, 0.004522, 0.052281, 0.060864, 0.033685, 0.046425, 0.062195, 0.021025, -0.022662, -0.022662
|
||||
#*# 0.038321, 0.038321, 0.016001, 0.026090, 0.013819, 0.027285, 0.034729, 0.042197, 0.065762, 0.056596, 0.010150, -0.046115, -0.046115
|
||||
#*# 0.003236, 0.003236, 0.003236, 0.009619, 0.006156, 0.035293, 0.002207, 0.081087, 0.038801, 0.052112, 0.010090, 0.010090, 0.010090
|
||||
#*# -0.024296, -0.024296, -0.024296, -0.024296, 0.006547, -0.004994, 0.033552, 0.044608, 0.046647, 0.079277, 0.079277, 0.079277, 0.079277
|
||||
#*# 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148, 0.047148
|
||||
#*# x_count = 13
|
||||
#*# y_count = 13
|
||||
#*# mesh_x_pps = 2
|
||||
#*# mesh_y_pps = 2
|
||||
#*# algo = bicubic
|
||||
#*# tension = 0.1
|
||||
#*# min_x = -147.0
|
||||
#*# max_x = 147.0
|
||||
#*# min_y = -147.0
|
||||
#*# max_y = 147.0
|
||||
|
||||
@ -1,3 +1,2 @@
|
||||
[Variables]
|
||||
zoffset = {'z': 0.08999999999999866}
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user