Update folder structure

02-klipper/01-configuration/macros.cfg

@@ -617,4 +617,4 @@ gcode:
   G3 I-150 F3500
   G2 I-150 F3500
   G3 I-150 F3500
-  G28
+  G28

02-klipper/01-configuration/printer.cfg

@@ -61,7 +61,7 @@
 [include macros.cfg]
 #[include adxl345_pico.cfg]  #Enable if you want to use ADXL with Rapsberry Pi Pico
 #[include adxl345_fysetc.cfg]  #Enable if you want to use ADXL with Fysetc Portable Input Shaper
-#[include timelapse.cfg]  #Enable if you want to use Timelapse
+[include timelapse.cfg]  #Enable if you want to use Timelapse
 #[include neopixels.cfg]  #Enable if you want to use some Neopixels macros
 
 ########################################
@@ -76,6 +76,7 @@
 [printer]
 kinematics: delta
 max_velocity: 600
+#max_accel: 10000
 max_accel: 8000
 minimum_cruise_ratio: 0.5
 square_corner_velocity: 5
@@ -197,7 +198,7 @@ stealthchop_threshold: 0
 
 [autotune_tmc extruder]  # Enable if Klipper TMC Autotune is used
 motor: flsun-v400-36
-tuning_goal: auto
+tuning_goal: performance
 
 
 ########################################
@@ -251,7 +252,7 @@ speed: 10
 lift_speed: 50
 samples: 8
 samples_result: average
-sample_retract_dist: 6
+sample_retract_dist: 10
 samples_tolerance: 0.02
 samples_tolerance_retries: 7
 

02-klipper/01-configuration/variables.cfg

@@ -1,3 +1,2 @@
 [Variables]
-zoffset = {'z': 0.11}
 

03-cura/01-configuration/.cspell.json

@@ -1,9 +0,0 @@
-{
-  "words": [
-    "Zechert",
-    "Cura",
-    "FLSUN",
-    "Superdraft",
-    "Verydraft"
-  ]
-}

03-cura/01-configuration/.editorconfig

@@ -1,9 +0,0 @@
-root = true
-
-[*]
-end_of_line = lf
-insert_final_newline = true
-charset = utf-8
-
-[*.md]
-indent_style = tab

03-cura/01-configuration/.gitignore

@@ -1,2 +0,0 @@
-.vale/styles/*
-!.vale/styles/Vocabulary

03-cura/01-configuration/.markdownlint.json

@@ -1,5 +0,0 @@
-{
-	"MD013": {
-		"line_length": 120
-	}
-}

03-cura/01-configuration/README.md

@@ -1,149 +1,4 @@
-# Cura printer profiles for Flsun V400 <!-- vale Microsoft.Headings = NO -->
-
-by Frank Zechert, 2025
-
-## About
-
-This directory contains cura printer definition and printing profiles for the 3d printer Flsun V400.
-
-## Install
-
-On a linux based system, run `install.sh` to install the configuration files into the cura directory.
-This will delete any other files that might be present for a flsun v400 printer.
-
-## Directory structure and configuration stack
-
-Cura stores printers and profiles across different directories that define different parts of the machine or the
-printing profile, and / or overwrite parts of it depending on presets. Cura loads them in a stack to get the current
-value of a configuration parameter that should apply to the print.
-
-### Directory structure
-
-<!-- markdownlint-disable MD013 -->
-
-| Folder        | Purpose                                                        | Typical Structure                                   | File Suffix                  |
-| :------------ | :------------------------------------------------------------- | :-------------------------------------------------- | :--------------------------- |
-| `definitions` | Defines the printer's core attributes                          | each printer has one file here                      | `printer_name.inst.cfg`      |
-| `extruders`   | Describes extruder-specific settings                           | can have multiple extruder configs per printer      | `extruder_name.inst.cfg`     |
-| `meshes`      | Contains files for visual representation of the printer.       | usually one per printer, optional                   | `printer_name.stl` or `.3mf` |
-| `intents`     | Print result intentions.                                       | one file per intent                                 | `intent.inst.cfg`            |
-| `quality`     | Stores print quality presets                                   | `printer_name` -> `material_name` -> `quality_type` | `quality_type.inst.cfg`      |
-| `variants`    | Defines nozzle diameter variants and links to quality profiles | `printer_name` -> `nozzle_size`                     | `variant.inst.cfg`           |
-
-<!-- markdownlint-enable MD013 -->
-
-### A note on intents and qualities
-
-An intent profile defines the intention for a print, such as precision, strength, visual quality, flexibility, etc.
-It might be empty, in which case it's displayed as the `default` intent.
-
-A quality profile defines different levels of quality, possibly within an intent if it exist. Different settings can
-influence the level of quality. For example, by changing the print speed or the layer height. They're in itself
-independent of the intent of the print.
-
-The print settings are a combination of intent settings (if an intent exists) and the quality level.
-
-### Configuration stack
-
-Cura stores configuration profiles in a stack. At the bottom of the stack is a definition container that defines
-all possible settings and properties a printer might have. On top of this definition container, a number of profile
-customizations and changes by the user take precedence over other quality profile definitions.
-
-When cura determines the value of a setting, it will look at the top most element in the stack that defines the
-setting's value.
-
-A printer has at least two stacks. A global stack that defines settings for the printer as a whole, and a stack for each
-extruder (at least one). The extruder-specific stack is always a higher priority than the global stack.
-
-```text
-+--------------------------------------+
-| Extruder n Configuration Stack       |
-+--------------------------------------+
-| 1. User settings made in the UI      |
-| 2. Custom settings saved by the user |
-| 3. Profile intent file (optional)    |
-| 4. Profile quality                   |
-| 5. Material settings                 |
-| 6. Nozzle settings                   |
-| 7. Definition changes                |
-| 8. Extruder Definition               |
-+--------------------------------------+
-
-                  |
-                  v
-
-+--------------------------------------+
-| Global Configuration Stack           |
-+--------------------------------------+
-| 1. User settings made in the UI      |
-| 2. Custom settings saved by the user |
-| 3. Profile intent file (optional)    |
-| 4. Profile quality                   |
-| 5. Material settings                 |
-| 6. Variant settings                  |
-| 7. Definition changes                |
-| 8. Extruder Definition               |
-+--------------------------------------+
-```
-
-For more details, see <https://github.com/Ultimaker/Cura/wiki/Container-Stacks>.
-
-### Printer definition
-
-This defines the basic printer and extruder capabilities. This is level `8` and `7` in the global and extruder
-configuration stacks.
-
-- The printer definition is in `definitions/flsun_v400.def.json`.
-- It has one extruder defined in `extruders/flsun_v400_extruder_0.def.json`.
-- The physical appearance of the printer is in `meshes/flsun_v400.stl`.
-
-### Intent files
-
-For now, this profile doesn't use intent files.
-
-### Quality files
-
-The quality files contain settings specifically relating to the quality of the print. They're defined in the file
-`quality/flsun_v400_global_<quality preset>_Quality.inst.cfg`. This file defines some global properties for all nozzle
-sizes and all materials. Linking global qualities to layer heights is a valid example, but not a must. Cura's intention
-seems to be a focus on print speed.
-
-In the configuration stacks, this relates to point `4`.
-
-You can choose the word that replaces `<quality preset>` in the file name. But the Cura UI will only integrate the
-quality profile if the quality preset placeholder contains known values:
-
-- Superdraft (for example for a layer height of `0.4mm` or a speed of `400mm/s`)
-- Verydraft (for example for a layer height of `0.3mm` or a speed of `320mm/s`)
-- Draft (for example for a layer height of `0.2mm` or a speed of `260mm/s`)
-- Fast (for example for a layer height of `0.15mm` or a speed of `180mm/s`)
-- Normal (for example for a layer height of `0.1mm` or a speed of `120mm/s`)
-- High (for example for a layer height of `0.06mm` or a speed of `80mm/s`)
-
-Not all files must exist, but at least one file needs to exist to compose a valid printing profile.
-
-This profile currently contains one quality file `quality/flsun_v400_global_Draft_Quality.inst.cfg`.
-
-### Material files
-
-Material files have the name `quality/<material name>/<nozzle size>/flsun_v400_<nozzle size>_<quality
-preset>_Print.inst.cfg`. They relate to step `5` in the configuration stacks.
-
-For now this profile contains the following files:
-
-- PLA or PLA+ with 0.4mm nozzle:
-  - Draft quality: `quality/PLA/0.4/flsun_v400_0.4_Draft_Print.inst.cfg`.
-
-### Variants file
-
-Currently this profile defines only one variant, a `0.4mm` nozzle size. This relates to step `6` in the configuration
-stack.
-
-- `variants/flsun_v400_0.4.inst.cfg`
-
-## Recommended Plugins
-
-Recommended plugins for the Cura Slicer:
+# Install Cura Plugins
 
 - Settings Guide
 - Sidebar GUI
@@ -151,13 +6,59 @@ Recommended plugins for the Cura Slicer:
 - Material Settings
 - Power Cost
 - Klipper Settings
-- AutoTower Generator
+- AutoTowers Generator
 - Auto-Orientation
 - Automatic Slicing Toggle
 - Material Cost Tools
-- Calibration Shapes Reborn
-- Direct Support Blockers Reborn
+- Calibration Shapes
 
-Also disable the following plugin to reduce loading speeds on linux:
+# Disable Cura Plugins
 
 - USB Printing
+
+
+# Loading Cura Printer Profiles
+
+Cura loads printer quality configuration files in a stack.
+The following files must be present in order for Cura to load a profile.
+
+## Quality File
+
+The file `quality/flsun_v400_global_<quality>_Quality.inst.cfg` defines some global properties for all nozzle sizes and
+all materials. Linking global qualities to layer heights is a valid example, but not a must. Cura's intentions seems to
+be centred on print speed.
+
+`<quality>`  should be replaced with one of the values following values, at least one must be present.
+
+- Superdraft (e.g. for layer height of `0.4mm`, or a speed of `600mm/s`)
+- Verydraft (e.g. for a layer height of `0.3mm`, or a speed of `400mm/s`)
+- Draft (e.g. for a layer height of `0.2mm`, or a speed of `300mm/s`)
+- Fast (e.g. for a layer height of `0.15mm`, or a speed of `200mm/s`)
+- Normal (e.g. for a layer height of `0.1mm`, or a speed of `150mm/s`)
+- High (e.g. for a layer height of `0.06mm`, or a speed of `80mm/s`)
+
+## Variant File
+
+On top of the global quality file, there needs to be setting file for each variant:
+`variants/flsun_v400_<variant>.inst.cfg`. The settings in these files are specific to the variant, but are independent
+of all quality or material settings.
+
+Variants can be whatever machine detail you want to choose. Commonly, this is the nozzle size.
+
+## Specific Settings
+
+The third layer of the stack is the quality, material, and variant specific settings in 
+`quality/<material>/<variant>/flsun_v400_<variant>_<material>_<quality>_Quality.inst.cfg`.
+
+## Intentions
+
+Optionally, there can be even more modifications of settings in intent files. 
+They are stored in the intents folder with the name intent
+`<material>/flsun_v400_<variant>_<material>_<quality>_<intent>.inst.cfg`.
+
+This file can modify settings that are only relevant for specific intents. Examples for intents are
+
+- Dimensional accuracy
+- Visual Quality
+- Smooth Surface
+- etc

03-cura/01-configuration/extruders/flsun_v400_extruder_0.def.json

@@ -1,59 +1,15 @@
 {
-	"version": 2,
-	"name": "Extruder 1",
-	"inherits": "fdmextruder",
-	"metadata": {
-		"machine": "flsun_v400",
-		"position": "0"
-	},
-	"overrides": {
-		"extruder_nr": {
-			"default_value": 0
-		},
-		"material_diameter": {
-			"default_value": 1.75
-		},
-		"machine_nozzle_size": {
-			"default_value": 0.4
-		},
-		"material_max_temperature": {
-			"default_value": 300
-		},
-		"material_min_temperature": {
-			"default_value": 180
-		},
-		"material_flow": {
-			"default_value": 100
-		},
-		"retraction_enable": {
-			"default_value": true
-		},
-		"retraction_amount": {
-			"default_value": 0.8
-		},
-		"retraction_speed": {
-			"default_value": 35.0
-		},
-		"retraction_min_travel": {
-			"default_value": 1.5
-		},
-		"cool_fan_enabled": {
-			"default_value": true
-		},
-		"cool_fan_speed": {
-			"default_value": 80
-		},
-		"cool_min_layer_time": {
-			"default_value": 10
-		},
-		"speed_print": {
-			"default_value": 250
-		},
-		"speed_travel": {
-			"default_value": 350
-		},
-		"klipper_pressure_advance_enable": {
-			"default_value": true
-		}
-	}
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "flsun_v400",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 }
+    }
 }

03-cura/01-configuration/install.sh

@@ -12,16 +12,6 @@ function get_cura_directories() {
 	CURA_INTERNAL_SHARE="${CURA_FOLDER}/share/cura/resources"
 }
 
-function check_continue() {
-	while true; do
-		read -rp "Continue? [y/n]: " yn
-		case $yn in
-			[Yy]*) return 0 ;;
-			[Nn]*) echo "Aborted"; return 1 ;;
-		esac
-	done
-}
-
 get_cura_directories
 
 echo "-------------------"
@@ -30,8 +20,6 @@ echo "Cura Share Folder: ${CURA_SHARE}"
 echo "Cura Folder: ${CURA_FOLDER}"
 echo "Own Folder: ${DIR}"
 echo "-------------------"
-check_continue
-echo "-------------------"
 echo "Deleting existing Cura resources for the printer FLSUN V400"
 find "${CURA_INTERNAL_SHARE}" -type f -iname 'flsun_v400*' -exec sudo rm {} +
 echo "-------------------"

03-cura/01-configuration/quality/PETG/0.4/flsun_v400_0.4_PETG_Draft_Print.inst.cfg

@@ -4,51 +4,12 @@ name = Draft
 definition = flsun_v400
 
 [metadata]
-setting_version = 23
+setting_version = 22
 type = quality
 quality_type = draft
 weight = -2
-material = generic_petg
+material = generic_pla
 variant = 0.4
 
 [values]
-# Quality
-
-
-# Walls
-
-
-# Top/Bottom
-
-
-# Infill
-
-
-# Material
-
-# Speed
-
-
-# Travel
-
-
-# Cooling
-
-# Support
-
-
-# Build Plate Adhesion
-
-
-# Mesh Fixes
-
-
-# Special Modes
-
-
-# Experimental
-
-
-# Klipper
-
-
+line_width = 0.44

03-cura/01-configuration/quality/PLA/0.4/flsun_v400_0.4_PLA_Draft_Print.inst.cfg

@@ -4,7 +4,7 @@ name = Draft
 definition = flsun_v400
 
 [metadata]
-setting_version = 23
+setting_version = 22
 type = quality
 quality_type = draft
 weight = -2
@@ -12,43 +12,4 @@ material = generic_pla
 variant = 0.4
 
 [values]
-# Quality
-
-
-# Walls
-
-
-# Top/Bottom
-
-
-# Infill
-
-
-# Material
-
-# Speed
-
-
-# Travel
-
-
-# Cooling
-
-# Support
-
-
-# Build Plate Adhesion
-
-
-# Mesh Fixes
-
-
-# Special Modes
-
-
-# Experimental
-
-
-# Klipper
-
-
+line_width = 0.44

03-cura/01-configuration/quality/flsun_v400_global_Draft_Quality.inst.cfg

@@ -1,4 +1,3 @@
-
 [general]
 version = 4
 name = Fast (Draft Quality)
@@ -12,58 +11,108 @@ weight = -2
 global_quality = True
 
 [values]
-
-# Quality
 layer_height = 0.2
 layer_height_0 = 0.2
-line_width = =machine_nozzle_size * 1.1
+initial_layer_line_width_factor = 110
+adhesion_type = skirt
 
-# Walls
-wall_line_count = 2
+acceleration_enabled = False
+acceleration_travel_enabled = False
+acceleration_Layer_0 = 5000
+acceleration_print = 8000
+acceleration_topbottom = 5000
+jerk_enabled = False
 
-# Top/Bottom
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid'
+infill_overlap = =20 if infill_sparse_density > 80 else 5
+infill_sparse_density = 10
+infill_wall_line_count = 1
+infill_enable_travel_optimization = True
+infill_wipe_dist = =line_width / 2
+infill_material_flow = =material_flow - 3
+wall_0_wipe_dist = =line_width
+zig_zaggify_infill = True
 
-# Infill
+bridge_settings_enabled = True
 
-# Material
+support_enable = False
+support_structure = tree
+support_type = everywhere
+support_infill_rate = 10
+support_pattern = lines
+support_roof_enable = True
+support_roof_pattern = grid
+support_xy_distance = 0.16
+support_brim_line_count = 10
+support_material_flow = =material_flow - 4
+support_roof_density = 50
+support_roof_material_flow = =support_material_flow
+support_tree_bp_diameter = 10
+support_xy_distance_overhang = 0.3
+support_z_distance = 0.15
+zig_zaggify_support = True
 
-# Speed
+roofing_layer_count = 1
+top_bottom_thickness = 1
+top_layers = 5
+bottom_layers = 4
 
-# Travel
+skin_monotonic = True
+skin_overlap = 20
+skirt_gap = 10
+skin_edge_support_layers = 4
 
-# Cooling
+bridge_skin_speed = 60
+bridge_wall_material_flow = 100
 
+fill_outline_gaps = False
 
-# Support
+optimize_wall_printing_order = True
 
+retraction_combing = noskin
 
-# Build Plate Adhesion
+small_feature_speed_factor = 40
+small_hole_max_size = 9
 
+speed_print = 120
+speed_infill = =speed_print * 1.0
+speed_support = =speed_print * 1.0
+speed_support_infill = =speed_print * 1.3
+speed_support_interface = =speed_print * 0.5
+support_interface_height = =layer_height * 2
+speed_support_roof = =speed_print * 0.5
+speed_support_bottom = =speed_print * 0.5
+support_interface_pattern = grid
+speed_travel = =speed_print * 2
+speed_layer_0 = 30
+speed_print_layer_0 = =speed_layer_0
+speed_travel_layer_0 = =speed_print_layer_0 * 2
+speed_roofing = =speed_layer_0 * 2
+speed_wall_0_roofing = =speed_roofing
+speed_wall_x_roofing = =speed_roofing
+skirt_brim_speed = =speed_print_layer_0
+speed_slowdown_layers = 3
+support_enable = False
+support_xy_distance = =line_width * 3
+support_z_distance = =layer_height * 1.5
 
-# Mesh Fixes
+speed_z_hop = 30
 
+wall_line_count = 3
+wall_overhang_angle = 35
+wall_overhang_speed_factor = 30
 
-# Special Modes
+z_seam_type = sharpest_corner
 
+retraction_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed / 2
 
-# Experimental
-
-# Klipper
-# This printer is using Klipper Firmware Acceleration control, Jerk control, Retraction and Input Shaping is done by the
-# firmware and does not need to be done by Cura.
-# - enable hardware retraction with G10/G11
 machine_firmware_retract = True
 klipper_retract_length = =retraction_amount
 klipper_retract_prime_length = =retraction_extra_prime_amount
-klipper_retraction_speed = =retraction_speed
-klipper_retract_speed = =retraction_retract_speed
 klipper_retract_prime_speed = =retraction_prime_speed
-# - enable pressure advance
+klipper_retract_speed = =retraction_speed
+klipper_retraction_speed = =retraction_speed
 klipper_pressure_advance_enable = True
-klipper_pressure_advance_factor = 0.04
-klipper_smooth_time_enable = True
-klipper_smooth_time_factor = 0.04
 
-# - disable cura acceleration and jerk control
-acceleration_enabled = False
-jerk_enabled = False
+travel_avoid_supports = True

03-cura/01-configuration/variants/flsun_v400_0.4.inst.cfg

@@ -4,156 +4,9 @@ version = 4
 definition = flsun_v400
 
 [metadata]
-setting_version = 23
+setting_version = 20
 type = variant
 hardware_type = nozzle
 
 [values]
-# Global Settings, valid for all
-# Printing with a 0.4 nozzle size
-machine_nozzle_size = 0.4
-
-# This printer is using Klipper Firmware Acceleration control, Jerk control, Retraction and Input Shaping is done by the
-# firmware and does not need to be done by Cura.
-# - enable hardware retraction with G10/G11
-machine_firmware_retract = True
-klipper_retract_length = =retraction_amount
-klipper_retract_prime_length = =retraction_extra_prime_amount
-klipper_retraction_speed = =retraction_speed
-klipper_retract_speed = =retraction_retract_speed
-klipper_retract_prime_speed = =retraction_prime_speed
-# - disable cura acceleration and jerk control
-acceleration_enabled = False
-jerk_enabled = False
-
-
-# Quality
-
-
-# Walls
-wall_distribution_count = 2
-wall_0_wipe_dist = =machine_nozzle_size * 2
-optimize_wall_printing_order = True
-# wall oder
-inset_direction = ='inside_out'
-# print thin walls
-fill_outline_gaps = True
-z_seam_type = ='sharpest_corner'
-
-# Top/Bottom
-# extra skin wall count
-skin_outline_count = 2
-
-# Infill
-infill_sparse_density = 15
-infill_pattern = ='gyroid' if infill_sparse_density < 80 else 'zigzag'
-infill_wall_line_count = 1
-connect_infill_polygons = True
-skin_edge_support_layers = 2
-
-# Material
-material_print_temperature = =default_material_print_temperature
-# Already start printing when reaching this temperature, we will still have some time to heat up
-# while printing the waste lien and the skirt / brim
-material_initial_print_temperature = =default_material_print_temperature - 10
-# first layer
-material_print_temperature_layer_0 = =default_material_print_temperature
-# Cool down the nozzle when a nozzle switch or standby is expected to happen
-# Nozzle will reach this temperature at the exact moment of nozzle switch or standby start
-material_final_print_temperature = =default_material_print_temperature - 15
-# first layer
-material_bed_temperature_layer_0 = =material_bed_temperature
-
-
-# Speed
-# General Print Speed, somewhat good quality but still good speed
-speed_print = 150
-
-# Infill, can be printed faster
-speed_infill = =speed_print * 1.4
-
-# Walls print a little bit slower
-speed_wall = =speed_print * 0.8
-# outer wall, prioritize quality
-speed_wall_0 = =speed_print * 0.6
-# between outer wall and infill, maintain adhesion
-speed_wall_x = =speed_print * 0.8
-# top surface outer wall, slower for better finish
-speed_wall_0_roofing = =speed_print * 0.5
-# top surface inner wall, sligthly faster than outer wall
-speed_wall_x_roofing = =speed_print * 0.6
-# Top skin, slower to ensure smooth finish and layer bonding
-speed_roofing = =speed_print * 0.6
-# balance of flatness and time
-speed_topbottom = =speed_print * 0.6
-# support finish does not matter, but needs to maintin somewhat dimensional accuracy
-speed_support = =speed_print * 1.2
-# infill
-speed_infill = =speed_print * 1.2
-speed_support_infill = =speed_print * 1.2
-speed_support_interface = =speed_print * 0.8
-speed_support_roof = =speed_print * 0.7
-speed_support_bottom = =speed_print * 0.8
-speed_prime_tower = =speed_print * 0.7
-speed_travel = =speed_print * 1.5
-
-# Layer 0 always slow for good adhesion
-speed_layer_0 = 30
-speed_print_layer_0 = 30
-speed_travel_layer_0 = 60
-skirt_brim_speed = 30
-speed_z_hop = 10
-speed_slowdown_layers = 3
-speed_euqalize_flow_width_factor = 70
-
-# Travel
-retraction_enable = True
-retract_at_layer_change = False
-retraction_amount = 0.8
-retraction_speed = 30
-retract_retract_speed = =retraction_speed
-retraction_prime_speed = =retraction_speed * 0.7
-retraction_extra_prime_amount = 0
-retraction_combing = no_outer_surfaces
-retraction_combing_max_distance = 2
-travel_avoid_other_parts = True
-travel_avoid_supports = True
-
-# Cooling
-cool_fan_speed = 80
-cool_fan_speed_min = =cool_fan_speed
-cool_fan_speed_max = 100
-cool_min_layer_time_fan_speed_max = 20
-cool_fan_speed_0 = 0
-cool_fan_full_layer = 3
-cool_min_layer_time = 10
-cool_min_speed = 15
-cool_lift_head = True
-cool_min_temperature = =material_print_temperature - 15
-
-# Support
-support_brim_width = 5
-support_xy_distance_overhang = 0.5
-support_tower_diameter = 8
-support_angle = 60
-
-
-
-# Build Plate Adhesion
-prime_blob_enable = False
-adhesion_type = ='skirt'
-skirt_line_count = 3
-skirt_gap = 3
-skirt_brim_minimal_length = 300
-
-# Mesh Fixes
-
-
-# Special Modes
-
-
-# Experimental
-infill_enable_travel_optimization = True
-wall_overhang_angle = 60
-bridge_settings_enabled = True
-
+line_width = 0.44

04-material/PETG/SUNLU/Rapid/White.md

@@ -1,22 +0,0 @@
-# PETG SUNLU Rapid White
-
-## Settings
-
-| Setting                       | Value    |
-| :---------------------------- | :------- |
-| Printing Temperature          | 245°C    |
-| Build Plate Temperature       | 70°C     |
-| Max Speed                     | 600mm/s  |
-| Flow                          | 100%     |
-| Retraction Distance           | 0.8mm    |
-| Retraction Speed              | 30mm/s   |
-| Retraction Extra Prime Amount | 0.06mm   |
-| Linear Advance Factor         | 0.04m/s² |
-
-## Prices, per 1KG
-
-- [Amazon](https://www.amazon.de/dp/B0D9NKJW22?ref=ppx_yo2ov_dt_b_fed_asin_title)
-
-| Date       | Price  |
-| :--------- | :----- |
-| 29.09.2025 | 10.22€ |

04-material/PETG/SUNLU/black.md

@@ -0,0 +1,21 @@
+# SUNLU Black PETG
+
+## Settings
+| Setting                                        | Value    |
+| :--------------------------------------------- | :------- |
+| Printing Temperature                           | 230°C    |
+| Build Plate Temperature                        | 70°C     |
+| Flow                                           | 100%     |
+| Retraction Distance                            | 0.4mm    |
+| Retraction Speed                               | 50mm/s   |
+| Retraction Extra Prime Amount                  | 0.03mm   |
+| Linear Advance Factor                          | 0.000    |
+
+## Prices
+
+https://www.3djake.de/3djake/ecopla-schwarz
+
+| Date       | Price  |
+| :--------- | :----- |
+| 21.03.2024 | 19.19€ |
+| 17.12.2024 | 17.99€ |

04-material/PLA+/SUNLU/Burly Wood.md

@@ -1,22 +0,0 @@
-# PLA+ SUNLU Burly Wood
-
-## Settings
-
-| Setting                       | Value   |
-| :---------------------------- | :------ |
-| Printing Temperature          | °C      |
-| Build Plate Temperature       | °C      |
-| Max Speed                     | 250mm/s |
-| Flow                          | 100%    |
-| Retraction Distance           | 1mm     |
-| Retraction Speed              | 20mm/s  |
-| Retraction Extra Prime Amount | 0.00mm  |
-| Linear Advance Factor         | 0.065   |
-
-## Prices
-
-- [Amazon](https://www.3djake.de/polymaker/polyterra-pla-peanut?sai=11929)
-
-| Date       | Price  |
-| :--------- | :----- |
-| 14.09.2025 | 14.99€ |

04-material/PLA+/SUNLU/black.md

@@ -0,0 +1,21 @@
+# PLA+ SUNLU Black
+
+## Settings
+
+| Setting                                        | Value    |
+| :--------------------------------------------- | :------- |
+| Printing Temperature                           | 215°C    |
+| Build Plate Temperature                        | 65°C     |
+| Flow                                           | 93.5%    |
+| Retraction Distance                            | 0.50mm   | ?
+| Retraction Speed                               | 50mm/s   | ?
+| Retraction Extra Prime Amount                  | 0.02mm   |
+| Linear Advance Factor                          | 0.04     |
+
+## Prices
+
+https://www.amazon.de/gp/product/B07Y5K1TB5?psc=1
+
+| Date       | Price  |
+| :--------- | :----- |
+| 13.12.2024 | 13.91€ |

04-material/PLA+/SUNLU/wood.md

@@ -0,0 +1,20 @@
+# PLA+ SUNLU Wood
+
+## Settings
+| Setting                                        | Value    |
+| :--------------------------------------------- | :------- |
+| Printing Temperature                           | 213°C    |
+| Build Plate Temperature                        | 65°C     |
+| Flow                                           | 93.5%    |
+| Retraction Distance                            | 0.55mm   |
+| Retraction Speed                               | 50mm/s   |
+| Retraction Extra Prime Amount                  | 0.03mm   |
+| Linear Advance Factor                          | 0.020    |
+
+## Prices
+
+https://www.amazon.de/gp/product/B07Y5K1TB5?psc=1
+
+| Date       | Price  |
+| :--------- | :----- |
+| 29.07.2024 | 17.99€ |

04-material/PLA/GEETECH/yellow.md

@@ -0,0 +1,21 @@
+# PLA GEETECH Yellow
+
+## Settings
+| Setting                                        | Value    |
+| :--------------------------------------------- | :------- |
+| Printing Temperature                           | 205°C    |
+| Build Plate Temperature                        | 65°C     |
+| Flow                                           | 94%      |
+| Retraction Distance                            | 0.55mm   |
+| Retraction Speed                               | 50mm/s   |
+| Retraction Extra Prime Amount                  | 0.03mm   |
+| Linear Advance Factor                          | 0.020    |
+
+## Prices
+
+https://www.amazon.de/gp/product/B075YHL7HQ?psc=1
+
+| Date       | Price  |
+| :--------- | :----- |
+| 26.08.2023 | 20.79€ |
+| 02.09.2024 | 17.99€ |

04-material/PLA/Polymaker/Polyterra/Peanut.md

@@ -1,22 +0,0 @@
-# PLA Polymaker Polyterra Peanut
-
-## Settings
-
-| Setting                       | Value   |
-| :---------------------------- | :------ |
-| Printing Temperature          | 210°C   |
-| Build Plate Temperature       | 60°C    |
-| Max Speed                     | 100mm/s |
-| Flow                          | 100%    |
-| Retraction Distance           | 1mm     |
-| Retraction Speed              | 20mm/s  |
-| Retraction Extra Prime Amount | 0.00mm  |
-| Linear Advance Factor         | 0.065   |
-
-## Prices
-
-- [3DJake](https://www.3djake.de/polymaker/polyterra-pla-peanut?sai=11929)
-
-| Date       | Price  |
-| :--------- | :----- |
-| 14.09.2025 | 14.99€ |

04-material/ecoPLA/3dJake/black.md

@@ -0,0 +1,22 @@
+# ecoPLA 3dJake Black
+
+## Settings
+
+| Setting                                        | Value    |
+| :--------------------------------------------- | :------- |
+| Printing Temperature                           | 230°C    |
+| Build Plate Temperature                        | 70°C     |
+| Flow                                           | 91%      |
+| Retraction Distance                            | 1mm      |
+| Retraction Speed                               | 50mm/s   |
+| Retraction Extra Prime Amount                  | 0.03mm   |
+| Linear Advance Factor                          | 0.025    |
+
+## Prices
+
+https://www.3djake.de/3djake/ecopla-schwarz
+
+| Date       | Price  |
+| :--------- | :----- |
+| 08.01.2024 | 19.99€ |
+| 12.10.2024 | 19.99€ |