52 lines
1.6 KiB
Markdown
52 lines
1.6 KiB
Markdown
klipper: https://github.com/Flsun3d/klipper_fs
|
||
|
||
mainsail: https://github.com/Flsun3d/mainsail_fs
|
||
|
||
moonraker: https://github.com/Flsun3d/moonraker_fs
|
||
|
||
# Flash Speeder Pad Imager
|
||
|
||
**1.Note**: Flashing the imager will reset all configurations and lose all data on your pad, so this operation is only used to restore the original settings of the Speeder Pad
|
||
|
||
**2.Tool**：
|
||
|
||
a)A TF card of at least 32 GB is required.
|
||
|
||
b)A TF card reader.
|
||
|
||
c)A PC，system is Windows、MacOS or Ubuntu for x86.
|
||
|
||
**3.Step**：
|
||
|
||
a)Download this restoration imager：
|
||
|
||
b)Download and install Raspberry Pi imager here：https://www.raspberrypi.com/software/
|
||
|
||
c)Insert the TF card into the PC and double-click to open the imager：
|
||
|
||
|
||
d)Select your TF card as Storage.
|
||
|
||
e)Then click Write.
|
||
|
||
f)Once the imager is written, turn off Speeder Pad if it is on and remove all devices plugged into the USB ports.
|
||
|
||
g)Insert TF card in Speeder Pad.
|
||
|
||
|
||
h)Turn on it，A loading bar should appear:
|
||
|
||
|
||
i)And wait until the bar is fully charged and green, this may take several minutes (10/15 minutes)：
|
||
|
||
|
||
j)When it's done, turn off Speeder Pad and remove the TF card.
|
||
|
||
k)Turn Speeder Pad back on, it should start normally and arrive on KlipperScreen Splash Screen.
|
||
|
||
## SSH Connection
|
||
```
|
||
user: pi
|
||
password: flsun
|
||
|